Round Countertop Basin with a Curved Tap Deck
The rear tap area of D66 follows a curved inner edge within the circular outer rim. This round countertop basin with a curved tap deck keeps its single tap position behind the washing cavity without adding a rear projection. Its smooth white exterior remains substantially upright beneath the continuous round perimeter. The factory top plan locates a floor opening centrally in the bowl. A round overflow appears on the inner rear wall just below the tap area in the photograph. D66 is listed for above-counter mounting at 465 × 465 × 150 mm overall. The equal plan spans identify the complete round body, including the integrated tap area, while 150 mm describes exterior height.
Shape & size
Shape and size of D66
A tap area bounded by an inward curve
The rear ceramic platform follows the circular body
The deck’s inner edge curves between the sides of the round rim. One tap opening occupies its middle, and the whole platform remains inside the outside circle.
Smooth outside wall beneath an uninterrupted rim
A plain cylindrical face surrounds the round bowl
The source side elevation is substantially upright. The white outside surface remains smooth rather than forming vertical ribs, while the upper perimeter follows a continuous circle.
An inner rear overflow and a central floor position
The openings occupy different parts of the same cavity
The photograph shows a round overflow below the tap platform. The floor opening is central in the original top plan, separate from that rear wall position.
465 × 465 × 150 mm overall
Keep the curved tap area inside the complete body measurements
D66 is white ceramic for above-counter mounting. The two 465 mm plan spans include the tap platform; the 150 mm measurement is outside height rather than a separately measured inner depth.
D66
465 × 465 × 150 mm
D66 round upright bowl with a curved rear tap deck
- D66 — 465 × 465 × 150 mm
- Required quantity