Round Ceramic Basin with a Tapered Exterior
A wide circular upper edge descends into D70’s narrowing outside profile and ends at a short flat lower line. The round ceramic basin with a tapered exterior keeps a plain smooth washing cavity within that open rim. Its original side sketch shows the decrease in width below the top, while the photograph retains softer lower transitions. There is one central floor opening and no integrated ceramic tap deck or separate overflow shown. White ceramic D70 is listed for above-counter mounting with 420 × 420 × 150 mm overall dimensions. The circular upper plan and full body height are published; a separate bottom width, taper angle and usable inner depth are not.
Shape & size
Shape and size of D70
A wide upper outline above a small lower boundary
The round body narrows below the open rim
The side sketch shows the outside drawing moving inward towards a short flat lower line. The ceramic photograph keeps soft lower transitions; no precise taper angle or independent bottom width is published.
A plain narrow edge around the whole circle
The upper perimeter stays circular without a solid platform
The top view follows a continuous circular rim around one bowl. No integrated ceramic tap area interrupts its perimeter; equal overall axes describe this circular outside plan.
One unpatterned washing cavity
A single floor opening occupies the bowl centre
Smooth inside surfaces run toward one central floor opening without an interior partition. The source does not show a separate overflow or identify the displayed waste fitting as part of the supply.
420 × 420 × 150 mm · above counter
Specify D70’s full circular body and narrowing elevation
The whole white ceramic exterior is 420 mm across both outside directions and 150 mm high. The dimensions do not separately define lower support width or usable cavity depth.
D70
420 × 420 × 150 mm
D70 circular upper rim and narrowing plain exterior
- D70 — 420 × 420 × 150 mm
- Required quantity