Round Basin with a Flared Lower Body
D458’s lower outside wall curves outward beneath a narrower circular upper neck. The round basin with a flared lower body combines those two levels within one smooth white ceramic exterior. In the original elevation, the upper wall is substantially upright before meeting the wider rounded lower contour. The top drawing retains circular outlines rather than straight side sections. A plain open rim surrounds the smooth washing cavity, with one central floor opening and no integrated ceramic tap platform. No separate overflow is represented in the source. D458 is listed for above-counter mounting at 410 × 410 × 155 mm overall. These dimensions describe the complete body, without a separate upper-rim diameter or usable inner depth.
Shape & size
Shape and size of D458
A narrower upper neck over a wider lower contour
The lower outside wall curves outward
The factory elevation draws upright upper walls followed by outward curves near the bottom. This change occurs within the same ceramic body rather than a separate base component.
Circular outlines at both exterior levels
The top plan retains a round arrangement
The upper and lower outlines remain circular in plan. Their concentric arrangement describes different levels; only the full outside spans are dimensioned.
Smooth cavity beneath an open circular rim
One central floor opening lies in the single bowl
The interior has no corresponding exterior contour pattern. No integrated ceramic tap platform or separate overflow is shown around the original open rim.
410 × 410 × 155 mm overall
Use the full D458 exterior and its published mounting
The catalogue lists white ceramic for above-counter installation. Both 410 mm spans cover the complete outside body; 155 mm is its total exterior height.
D458
410 × 410 × 155 mm
D458 circular upper neck above a flared lower body
- D458 — 410 × 410 × 155 mm
- Required quantity