Rear-Deck Semi-Recessed Basin with Stepped Lower Body, 500mm
The narrower underside distinguishes the 500mm rear-deck semi recessed basin with stepped lower body. D486 sets a rounded rectangular bowl above a smaller lower section. A horizontal shoulder separates that section from the broader upper wall. The rear platform carries a centred tap position, while the drain sits within the bowl. The printed model size is 500 × 425 × 155 mm. Its accompanying side drawing marks 150 mm in height, so both source figures are recorded. The white ceramic model appears in the catalogue as above-counter and semi-recessed. Identify it by the soft rectangular rim, rear deck and stepped lower body, retaining the height note with the model dimensions.
Shape & size
Shape and size of D486
Narrower lower section
Horizontal shoulder below the wider body
The upper wall extends beyond the smaller lower section. The side drawing shows the change in width as a distinct shoulder beneath the bowl.
Soft rectangular rim
Rounded corners above a stepped underside
The upper outline has four side segments with generous corner curves. This rounded rectangle sits above the narrower lower body.
Centred rear tap position
Rear platform separate from the bowl drain
The single tap position occupies the middle of the rear deck. The drain sits independently within the bowl.
Printed 500 × 425 × 155 mm
Model size with a recorded side-drawing height difference
The Size line states 155 mm overall height; the side drawing marks 150 mm. Width and front-to-back size remain 500 and 425 mm.
- Width
- 500 mm
- Front to back
- 425 mm
- Outside height
- 155 mm
Catalogue lists two installation forms
D486 rear-deck and stepped-body specification
D486 is listed for above-counter and semi-recessed mounting. Retain the printed model size and its height note with the stepped body and rear deck.
- Model
- D486
- Material
- Ceramic
- Appearance
- White
D486 rear-deck and stepped-body specification · D486
- Model: D486
- 500 × 425 × 155 mm
- Required quantity