Polygonal Countertop Basin with Flared Sides
Angular side projections interrupt the straight end edges of D157’s polygonal top outline. This polygonal countertop basin with flared sides has planar outside faces that slope toward a narrower lower boundary. The original photograph preserves these defined transitions around one smooth washing cavity. A plain ceramic rim follows the changing outer edges, while a single floor opening lies centrally within the bowl. No rear tap platform or separate overflow is shown. D157 is published as white ceramic for above-counter mounting at 600 × 410 × 150 mm overall. The full dimensions describe the exterior body; they do not separately give face angles, inner floor spans or usable bowl depth.
Shape & size
Shape and size of D157
An outer plan with projecting lateral edges
Angled side sections extend beyond the straight end boundaries
The factory plan gives the outside perimeter distinct straight and angled sections. Its side projections make a polygonal outline rather than a continuously curved oval or a regular geometric hexagon.
Defined flat faces around the lower body
The exterior faces slope toward a narrower lower boundary
The photograph shows angular joins between the outside surfaces. The elevation retains a sloping outline without specifying a separate inclination angle or lower body width.
One open cavity and a central floor position
A plain rim surrounds the smooth single bowl
The inner washing surface continues toward one circular floor opening. No integrated tap deck or separate overflow is represented, and outside facets are not described as an inner surface texture.
600 × 410 × 150 mm overall
Specify D157’s full angular exterior rather than inner spans
The white ceramic body is listed for above-counter installation. Its published plan spans and total exterior height do not separately measure the inner floor or usable depth.
D157
600 × 410 × 150 mm
D157 polygonal open bowl with sloping angular outside faces
- D157 — 600 × 410 × 150 mm
- Required quantity