Oval Slipper Freestanding Tub with Sculpted Interior, 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB FT035 is an oval slipper tub in gloss white acrylic whose slim rim sweeps up to one raised end. Inside, the basin is sculpted with curved surfaces, and the base rests flat on the floor. FT035 is made in a single size, FT035, at 1700 × 800 × 580 mm (67 × 31.5 × 22.8 in), with the 580 mm height taken at the raised end. The rim has no tap holes, so FT035 takes a floor-standing or wall-mounted filler. Project quotes come back within 12 business hours.
See the full slipper tub collection.
More in Slipper Tubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of FT035
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Profile & Interior
Sweeping rim over a sculpted basin
FT035 is an oval freestanding tub with one raised end. The slim rim rises in a single sweep toward that end, and the inside of the tub is shaped in curves.
Rim rising to one end
From the low end the rim lifts steadily to the raised end, which serves as the backrest. The overall height of 580 mm (22.8 in) is taken there.
Curved basin surfaces
The basin is sculpted with curved surfaces rather than plain flat walls. Its interior profile is confirmed on the approved drawing and the approval sample.
Freestanding tubs in other lengths and plans are grouped in the freestanding bathtub collection.
Fit & Faucet
580 mm at the raised end, 800 mm wide
FT035 measures 67 by 31.5 by 22.8 inches (1700 by 800 by 580 mm), with the height taken at the raised end.
- FT035
- 67" × 31.5" × 22.8" (1700 × 800 × 580 mm)
- Faucet Mount
- Floor-standing filler or wall spout
- Base
- Flat to floor
The rim has no tap holes. A floor-standing filler needs its supply brought up through the floor beside the tub, so fix that position before the floor is finished; a wall-mounted spout must reach over the rim.
Request the FT035 drawing to set the waste and filler positions.
Material & Finish
Gloss white acrylic, sculpted inside
The shell of FT035 is pure acrylic sheet with a gloss white surface.
White
Curves in gloss white
The sculpted interior and the sweeping rim are both finished in gloss white. Fix the finish on the approved sample before the order runs.
The raised end is the tallest part of the shell. Ask how it and the slim rim are protected inside the carton during loading.
Look over the rim and the raised end when each carton is opened.
Compliance
Compliance documents for FT035
Use the full SKU on document requests so the certificate and the order line match.
Compliance documents for FT035 are matched to your destination market. Ask for the document details against FT035 before it goes into a submittal.
Mention the destination market in the enquiry; the reply is sent within 12 business hours.
Procurement
Ordering FT035
Only FT035 is made, and the standard lead time is 30-45 days after sample approval.
- Size
- 1700 × 800 × 580 mm
- Standard Lead Time
- 30-45 days after sample approval
If a floor-standing filler is needed, name it in the enquiry so it can be quoted as a separate line with its finish.
Include these details with the RFQ
- Quantity of FT035
- Floor-standing faucet or wall spout
- Waste fitting
- Destination market and port
- Private-label marking
- Target shipping date
A filler ordered with the tub appears on its own quotation line.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request