Oval Basin with a Broadly Inward-Curved Lower Body
The lower outside shell sweeps inward beneath a continuous oval rim toward a narrower flatter bottom boundary. This oval basin with a broadly inward-curved lower body surrounds one smooth washing cavity with a central floor opening and no integrated tap deck. White ceramic D605 publishes 505 × 390 × 125 mm; D606 publishes 650 × 405 × 125 mm. Both are above-counter models. D605’s original drawing separately shows a 395 mm front-to-back span, conflicting with its printed 390 mm. Both source values remain visible; confirm the factory dimensions before installation. The shared 125 mm is complete outside height, rather than a separately measured usable bowl depth.
Shape & size
Shape and size of D605 / D606
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
-
NO. D605505 × 390 × 125 mm -
NO. D606650 × 405 × 125 mm
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Broad inward lower curve · narrower flat lower boundary
The lower outside curves inward instead of remaining mainly upright
The original photograph and elevation show a smooth outer shell curving inward toward a narrower bottom line. This broad lower curve differs from an upright main wall ending only in short bottom-corner fillets.
Continuous oval edge · one smooth cavity · central floor opening
The plain rim runs around an oval bowl without a tap platform
The top outline curves continuously around two unequal plan spans, without the straight middle sections of a capsule. A plain open rim surrounds one smooth cavity and its central floor opening; no integrated ceramic tap deck is shown.
D605 printed 390 mm · original drawing 395 mm
D605 keeps its printed size and the different original drawing span
The size table publishes D605 as 505 × 390 × 125 mm. Its original drawing retains a 395 mm front-to-back span. These are conflicting source values for one model, not two size options. Confirm factory dimensions before installation.
Two original oval sizes · common 125 mm outside height
Each model keeps its own three-number size and complete plan
D605 publishes 505 × 390 × 125 mm and D606 650 × 405 × 125 mm. Both specify above-counter installation. Each size retains its own photograph and drawing; the common outside height does not independently measure usable internal depth.
D605
505 × 390 × 125 mm
D606
650 × 405 × 125 mm
Oval Basin with a Broadly Inward-Curved Lower Body — D605/D606
- D605 — 505 × 390 × 125 mm
- D606 — 650 × 405 × 125 mm
- Required quantity