Narrow Rounded Rectangle Freestanding Tub, 27.6 in Wide, 59 & 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8029 is a narrow, double-ended acrylic freestanding bathtub, 700 mm (27.6 in) wide, with a rounded-rectangle plan, a thin rim and S-curved ends that draw in toward a narrower flat base. Two lengths are made: D-8029-150 at 1500 × 700 × 600 mm (59 × 27.6 × 23.6 in) and D-8029-170 at 1700 × 700 × 600 mm (67 × 27.6 × 23.6 in). The drain is centered in both directions. There are no tap holes in the thin rim, so D-8029 is filled from a floor-standing or wall-mounted filler.
Quotes for D-8029 are sent within 12 business hours. Browse the SANIKB freestanding bathtub collection.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8029
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8029-150 | 59" x 28" |
| D-8029-170 | 67" x 28" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 59" x 28"D-8029-150 | 67" x 28"D-8029-170 | |
|---|---|---|
| Overall L×W×D | 59″ × 27.6″ × 23.6″ 1500 × 700 × 600 mm | 67″ × 27.6″ × 23.6″ 1700 × 700 × 600 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Width
A 700 mm wide rounded rectangle
D-8029 keeps the width to 700 mm for tighter rooms. The sides curve in toward the base, and each end follows an S-curve in elevation.
Width held at 27.6 inches
Both lengths share the 700 mm width, so D-8029 can stand between fixtures where a wider freestanding tub would crowd the floor.
S-curved ends, drain on center
The drawing shows each end rising in an S-curve. The drain sits 350 mm from the side and at mid-length, so either end can take the bather's back.
Wider rounded-rectangle models are in the freestanding bathtub collection.
Fit & Clearance
Narrow 700 mm body in two lengths
D-8029 measures 1500 or 1700 mm long, 700 mm wide and 600 mm (23.6 in) high.
- 59 in Size
- 59" × 27.6" × 23.6" (1500 × 700 × 600 mm), D-8029-150
- 67 in Size
- 67" × 27.6" × 23.6" (1700 × 700 × 600 mm), D-8029-170
- Drain
- Centered: 350 mm from the side, 750 / 850 mm from the end
- Base
- Flat, narrower than the rim
Inner depths on the drawing are 460 mm and 470 mm (18.1 and 18.5 in). Settle the filler type, floor-standing or wall-mounted, before the floor waste and supply lines are roughed in.
If a floor-standing filler is chosen, allow for its footprint beside the 700 mm body when planning the walkway.
Construction & Finish
Acrylic shell with a thin rim
D-8029 is formed from pure acrylic sheet in white, with a thin rim above the inward-curving sides.
White
Narrow plan, full-height walls
At 600 mm (23.6 in) the walls stand at full height even though the plan is only 700 mm wide.
The finish sheen of D-8029 is confirmed on the approval sample, and incoming units are inspected against that sample.
For apartment refits, measure door and corridor widths along the delivery route as well as the bathroom itself.
Agree how transit damage is recorded and reported before the first shipment.
Compliance
Compliance documents for D-8029
Where a submittal relies on the 700 mm width, attach the approved drawing so the reviewer sees the measured figure.
Compliance documents for D-8029 are matched to your destination market. Ask for the document references and validity date, and have both SKUs, D-8029-150 and D-8029-170, named on them.
Tell us which market the tubs are going to, and SANIKB replies in writing within 12 business hours.
Procurement
Ordering D-8029
Both narrow D-8029 lengths are produced on a lead time of 30-45 days after sample approval.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- within 12 business hours
Where both lengths go into the same building, give the count for each SKU so cartons can be labeled by room type.
Include these details with the RFQ
- Quantity of D-8029-150
- Quantity of D-8029-170
- Floor-standing or wall-mounted filler
- Drain trim
- Destination market and port
- Delivery window
Confirm the lead time on the quotation before booking freight.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request