Matte White Double Slipper Freestanding Tub, 59 & 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8379 is a double slipper freestanding bathtub in matte white acrylic. The slim rim sweeps up at both ends in a saddle line, the plan is a soft egg-shaped oval, and the body tapers to a narrow flat base, with the drain and overflow at the center. It comes as D-8379-150, 1500 × 800 × 650 mm (59 × 31.5 × 25.6 in), and D-8379-170, 1700 × 800 × 650 mm (67 × 31.5 × 25.6 in). There are no tap holes in the rim; the tub takes a floor-standing or wall-mounted filler.
For D-8379, SANIKB returns a quote for either length within 12 business hours. Browse matching profiles in the slipper tub collection.
More in Slipper Tubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8379
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8379-150 | 59" x 31" |
| D-8379-170 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 59" x 31"D-8379-150 | 67" x 31"D-8379-170 | |
|---|---|---|
| Overall L×W×D | 59″ × 31.5″ × 25.6″ 1500 × 800 × 650 mm | 67″ × 31.5″ × 25.6″ 1700 × 800 × 650 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Backrests
Both ends raised over a centered drain
D-8379 is symmetric: the rim rises toward each end in a saddle line, so either end can serve as the backrest. The drain and overflow sit at mid-length.
Two matching backrests
The drawing shows the same rise at both ends of the oval plan, so the bather can recline at either end with the drain in between.
Tapered body, narrow flat base
Below the 15 mm (0.6 in) rim the walls curve inward to a narrow flat base, which keeps the floor footprint smaller than the rim outline.
Single-ended alternatives sit alongside it in the freestanding bathtub range.
Fit & Dimensions
Two lengths at 800 mm wide and 650 mm high
D-8379-150 is 59 × 31.5 × 25.6 inches (1500 × 800 × 650 mm) and D-8379-170 is 67 × 31.5 × 25.6 inches (1700 × 800 × 650 mm). Width and height are the same on both.
- D-8379-150
- 59" × 31.5" × 25.6" (1500 × 800 × 650 mm)
- D-8379-170
- 67" × 31.5" × 25.6" (1700 × 800 × 650 mm)
- Inner Depth (as drawn)
- 17.5" / 18.5" / 17.5" (445 / 470 / 445 mm)
- Faucet Mounting
- No tap holes; floor-standing or wall-mounted filler
On the 1500 mm drawing the length is dimensioned 260 + 980 + 260 mm and the width 145 + 510 + 145 mm. With the drain on the center line, the floor waste goes at mid-length on either size.
Confirm the drain and overflow positions for the ordered D-8379 length on its approved drawing.
Construction & Finish
Matte white acrylic
D-8379 is made from pure acrylic sheet, and the surface is matte white.
White
Low-sheen finish
A matte surface gives D-8379 an even look without strong reflections. Where it shares a bathroom with high-shine ceramics, approve the pairing on a sample.
The narrow base sits flat to the floor. Finish and level the floor first, then place the tub and connect the waste at the center.
Keep the approved D-8379 matte sample as the reference for finish checks on arrival.
Compliance
Compliance documents for D-8379
Name D-8379-150 or D-8379-170 when documents are requested, so each length is covered.
For a project file covering both D-8379 sizes, D-8379-150 and D-8379-170, request the compliance documents and their current validity from SANIKB.
Tell us the destination country and the documents your inspector asks for, and the D-8379 reply is issued in writing within 12 business hours.
Procurement
Quoting D-8379 by length
The 1500 mm and 1700 mm lengths are quoted as separate lines and made 30-45 days after sample approval.
- Size SKUs
- D-8379-150, D-8379-170
- Standard Lead Time
- 30-45 days after sample approval
Because the whole matte shell stays on view after installation, set out the wrapping and carton protection for D-8379 in the quotation.
Include these details with the RFQ
- Quantity of each D-8379 length
- Destination market and port
- Filler: floor-standing or wall-mounted
- Brand marking on cartons
- Shipping window
The D-8379 lead time stays indicative until SANIKB issues the quotation.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request