Low Rectangular Basin with End Tap Hole
The low rectangular basin with end tap hole combines D495’s long narrow footprint with a short ceramic body. Its tap position occupies one end region, while a separate floor opening lies farther along the same long axis. The original top drawing keeps these positions within one rectangular perimeter, without a transverse line defining a separate end platform. Smooth outside faces rise straight beneath a narrow upper edge. Inside, plain surfaces slope toward the floor opening. The complete white ceramic body measures 450 × 220 × 95 mm and is specified for above-counter mounting. That final measurement is outside height, rather than a published usable bowl depth.
Shape & size
Shape and size of D495
Two positions within one long footprint
An end tap opening separate from the floor opening
The tap sits toward one short-end region. A separate floor opening occupies the bowl farther along the long axis, within the same external rectangle.
Read the specific original top plan
No drawn cross-line for a separate end platform
The top drawing shows the tap and floor positions without a transverse division into a distinct end deck. This detail separates D495 from deck-defined bodies.
Plain faces beneath a narrow edge
A short straight exterior around a smooth cavity
Unpatterned outer faces form a low rectangular shell. Inside surfaces slope inward toward the floor opening, without textured panels shown.
450 × 220 × 95 mm overall
Specify the low D495 body by its outside envelope
The 450 and 220 mm axes describe the external footprint. The source specifies above-counter mounting and gives total height, without inner depth.
D495
450 × 220 × 95 mm
D495 low rectangular body for the project
- D495 — 450 × 220 × 95 mm
- Required quantity