Low Rectangular Basin with a Plain Box Profile
A low, largely upright box outline defines D418’s original side elevation. The low rectangular basin with a plain box profile places one smooth washing cavity inside an uninterrupted upper rim. Its top plan has four straight side middles connected by small corner curves, with a single floor opening at the centre. The broad inner floor and surrounding sloping surfaces remain plain, as do the outside walls. No ceramic tap platform, divider or separate overflow appears in the original reference. White ceramic D418 is listed for above-counter mounting at 600 × 400 × 120 mm overall. The 120 mm height belongs to the entire exterior body; the source gives no independent usable depth or inner floor dimensions.
Shape & size
Shape and size of D418
A plain low exterior between upper and lower boundaries
The side view retains a substantially upright box
The original elevation shows near-upright outside walls with short lower corner transitions. Its 120 mm label is whole-body height without a separately published inner depth.
Four straight side sections on unequal spans
Small arcs connect the rectangular outline
The top plan combines straight middle segments with curved corner transitions. The complete 600 × 400 mm footprint is outside the ceramic body rather than an independently dimensioned floor.
Smooth inside surfaces meet one floor opening
The open bowl remains continuous without a platform
The factory photograph shows a broad plain inner floor with surrounding smooth slopes. The rim includes no tap platform or divider, and no separate overflow is shown.
600 × 400 × 120 mm overall
Specify D418’s complete low rectangular body
The manufacturer publishes white ceramic for above-counter mounting. Identify the whole exterior in the quotation; usable floor dimensions and external fitting positions are separate measurements.
D418
600 × 400 × 120 mm
D418 low plain box body with an open single cavity
- D418 — 600 × 400 × 120 mm
- Required quantity