Fluted D-Shape Back-to-Wall Bathtub on Plinth Base, 59 & 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB CJ02 is a D-shaped acrylic back-to-wall bathtub with vertical fluting across its exposed outer skin, standing on a plinth base. The wall side is flat, the front corners are rounded, and a smooth oval basin sits inside a slim rim. CJ02 is made in two sizes: CJ02-150 at 1500 × 750 × 580 mm (59 × 29.5 × 22.8 in) and CJ02-170 at 1700 × 800 × 580 mm (67 × 31.5 × 22.8 in). The overflow and drain are centered. The rim has no tap holes, so the tub takes a floor-standing or wall-mounted filler.
The fluted shell and plinth base are white, with the gloss level confirmed on the approval sample. Quotes for CJ02 are sent within 12 business hours. See SANIKB freestanding bathtubs.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of CJ02
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| CJ02-150 | 59" x 30" |
| CJ02-170 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 59" x 30"CJ02-150 | 67" x 31"CJ02-170 | |
|---|---|---|
| Overall L×W×D | 59″ × 29.5″ × 22.8″ 1500 × 750 × 580 mm | 67″ × 31.5″ × 22.8″ 1700 × 800 × 580 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Texture & Base
Vertical fluting on a plinth base
CJ02 pairs a fluted outer skin with a smooth oval basin. The flutes run vertically on the exposed skin, and the tub stands on a plinth base.
Fluted skin facing the room
The vertical flutes cover the exposed sides that face the room, while the flat wall side goes against the wall. The inside of the tub is a smooth oval basin.
Plinth base, double-ended basin
The body sits on a plinth base rather than on feet. Both ends are shaped as backrests, with the overflow and drain centered.
Fluted tubs are usually specified where the outside of the tub is part of the room design. Smooth-skinned shapes are in the SANIKB bathtub range.
Fit & Footprint
Two lengths: 1500 mm and 1700 mm
The 1500 mm size is 750 mm (29.5 in) wide and the 1700 mm size is 800 mm (31.5 in) wide. Both are 580 mm (22.8 in) high.
- CJ02-150
- 59" × 29.5" × 22.8" (1500 × 750 × 580 mm)
- CJ02-170
- 67" × 31.5" × 22.8" (1700 × 800 × 580 mm)
- Installation
- Back-to-wall on a plinth base
- Faucet Mount
- Floor or wall
The two sizes differ in width as well as length, so check the clear space in front of the tub for the size you choose. The plinth footprint and drain position are confirmed on the approved drawing.
Set out the floor waste once the plinth footprint is confirmed on the approved drawing.
Construction & Finish
White acrylic with a fluted finish
CJ02 is formed from pure acrylic sheet in white.
White
Texture sets it apart
The fluted skin is the design feature on this model, and CJ02 is made in white.
Gloss level is confirmed on the approval sample, so the fluted finish is signed off there before production.
Fluted surfaces need careful packing. Agree carton protection and the damage-reporting process before shipment.
Production starts only after the fluted finish is approved on the sample.
Compliance
Compliance documents for CJ02
Name CJ02-150 and CJ02-170 separately when requesting certificates and drawings.
Compliance documents for CJ02 are matched to your destination market. Request the document references and their validity for each SKU you order so the submittal matches.
Send the destination market and required documents with the inquiry; replies are issued in writing within 12 business hours.
Procurement
Ordering CJ02 in two sizes
CJ02 is made as CJ02-150 and CJ02-170. Quantities for each are written into the quotation.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- Sent within 12 business hours
The sample is where the fluted finish is signed off, and standard lead time is 30-45 days after sample approval. Private label marking is handled through the SANIKB OEM and ODM program.
Include these details with the RFQ
- Quantity per size: CJ02-150 and CJ02-170
- Destination market and port
- Finish approval on the sample
- Faucet scope, if any
- Carton marking
- Shipping window
Lead time for CJ02 is indicative until the quotation is issued.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request