Flared-Lip Stadium Oval Freestanding Tub, Double-Ended, 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB FT036 is a stadium-oval freestanding bathtub in gloss white acrylic whose top edge flares out into a bell-like lip, over a body that narrows down to the floor. It is made in one size, SKU FT036, at 1700 × 800 × 600 mm (67 × 31.5 × 23.6 in). The flared lip forms a wide flat rim, both ends are backrests, and the rim has no tap holes, so the filler is floor-standing or wall-mounted. The tub stands directly on the floor with no feet.
Other profiles are shown in the SANIKB freestanding bathtub collection.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of FT036
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Profile
Bell-like flared lip over a narrowing body
FT036 is a stadium oval in plan. Its top edge flares outward into a bell-like lip, and below that the body narrows as it runs down to the floor.
Wide flat rim formed by the flare
The flare ends in a wide flat rim, so the top of the tub is broader than its base. The surface is gloss white.
Backrest at both ends
FT036 is double ended. With a backrest shape at each end, there is no fixed head end and the tub can be placed either way round on the plan.
Profiles with straight or plainly tapered sides are grouped in the freestanding bathtub range.
Fit & Footprint
1700 × 800 mm at the lip, 600 mm high
FT036 has a single SKU, FT036, at 67 by 31.5 by 23.6 inches (1700 by 800 by 600 mm). The body sits flat on the floor with no feet or plinth.
- Overall Size
- 67" × 31.5" × 23.6" (1700 × 800 × 600 mm)
- Installation
- Freestanding, flat to the floor
- Faucet Mount
- Floor-standing or wall-mounted
- Material
- Pure acrylic sheet, gloss white
Because the body narrows toward the floor, the base is smaller than the 1700 × 800 mm outline at the lip, but clearances to walls and fixtures should be measured from the lip. A floor-standing faucet has to reach over the flared edge, so check the spout reach against the drawing.
Take the drain position from the approved drawing before the floor waste is set, and measure wall clearances from the outer edge of the flared lip.
Construction & Finish
Gloss white pure acrylic
FT036 is formed from pure acrylic sheet with a gloss white finish that runs over the curve of the flared lip.
White
Gloss on a curved lip
Gloss white is the finish for FT036. Check the lip on the approval sample under neutral light if the finish has to be matched to basins or other gloss fixtures.
The flared lip stands proud of the body, which leaves it open to impact when cartons are stacked or moved. Agree how the lip is supported inside the packing.
Inspect the lip edge at delivery and record any chips before installation.
Compliance
Compliance documents for FT036
With one size made, documents are issued against FT036 and SKU FT036.
Compliance documents for FT036 are matched to the destination market. For a project file, request the document references and validity date, and tell us which market the tubs are going to.
We reply to document and quotation requests within 12 business hours.
Procurement
Ordering FT036
FT036 is made as one SKU, so quantity and filler type are the first two lines of the enquiry.
- SKU
- FT036
- Standard Lead Time
- 30-45 days after sample approval
The sample stage is the point to approve the lip profile and gloss before production, and lead time starts from that approval. Private label marking is available through the SANIKB OEM and ODM program.
Include these details with the RFQ
- Quantity of FT036
- Filler type: floor-standing or wall-mounted
- Destination market and port
- Required certificates
- Brand marking on carton
- Target delivery window
Lead time is indicative until confirmed on the quotation.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request