Faceted Slipper Soaking Tub with Cushion-Shaped Plan, 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8078 is a single slipper soaking tub in white acrylic whose outer walls are cut into facets that taper down to a narrow flat base. From above it is a cushion-shaped rectangle with bowed sides, and the rim rises to a 720 mm backrest end. It is shown with a black slotted overflow at the drain end; that overflow is confirmed at quotation. The only size is D-8078, 1700 × 795 × 720 mm (67 × 31.3 × 28.3 in). The rim has no tap holes, so D-8078 takes a floor-standing or wall-mounted filler. Quotes go out within 12 business hours.
More raised-back designs sit in the slipper tub collection.
More in Slipper Tubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8078
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Facets & Plan
Faceted walls on a cushion-shaped rectangle
D-8078 combines a rectangular plan with bowed sides and ends and outer walls broken into facets that narrow toward the floor. The rim climbs to 720 mm (28.3 in) at the backrest.
Angled planes down to a narrow base
The outer walls are cut into flat faces that taper to a small flat base, so the tub is slimmer at floor level than at the rim.
Slotted overflow at the drain end
The tub is shown with a black slotted overflow in the inner wall at the low end, opposite the backrest, so the overflow and the drain share the end away from the reclining position. Its finish is agreed at quotation.
Other deep designs, single- and double-ended, sit in the soaking tub collection.
Fit & Setting-Out
795 mm wide, drain 340 mm from the low end
D-8078 is 1700 mm (67 in) long and 795 mm (31.3 in) wide, standing 720 mm (28.3 in) at the raised end.
- D-8078
- 67" × 31.3" × 28.3" (1700 × 795 × 720 mm)
- Drain Position
- 340 mm (13.4 in) from low end, 397 mm (15.6 in) from side
- Inner Depth
- 460 mm (18.1 in) at drain end; 450 mm (17.7 in) also marked
- Faucet Mount
- Floor or wall
At 397 mm from the side, the drain is on the center line of the 795 mm width. The faceted walls taper to a narrow base, so the contact area on the floor is smaller than the 1700 × 795 mm rim outline; take the base outline from the drawing when planning floor finishes.
Confirm the waste position on the approved D-8078 drawing.
Material & Finish
White acrylic shell, faceted to the floor
D-8078 is formed from pure acrylic sheet in white, with the facets running from the slim rim down to the narrow base.
White
A dark overflow on a white shell
The black slotted overflow is confirmed at quotation, then checked on the approval sample alongside the white shell.
The facet edges and the raised end are the exposed points in transit. Ask how both are protected inside the carton.
Check the facet edges and the backrest rim when each carton is opened.
Compliance
Compliance documents for D-8078
Name the overflow finish on the same order line as D-8078 so the documents and the packing list match.
Compliance documents for D-8078 are matched to your destination market. Before a submittal, request the document reference and validity for D-8078.
Give the destination market at enquiry stage; quotes for D-8078 are issued within 12 business hours.
Procurement
Ordering D-8078
SANIKB makes D-8078 in one size, and production is 30-45 days after sample approval.
- Size
- 1700 × 795 × 720 mm
- Standard Lead Time
- 30-45 days after sample approval
Check the facet lines and the black overflow on the sample, since together they set how the tub looks in the room.
Include these details with the RFQ
- Quantity of D-8078
- Filler type: floor-standing or wall-mounted
- Overflow finish and waste fittings
- Destination market and port
- Carton marking
- Shipping month
Keep the approved sample as the check for facet lines and overflow color.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request