Home› Bath & Fixtures› Shower & Bath› Bathtubs› D-8350-150

SANIKB D-8350 - white egg-shaped single-slipper freestanding tub with a rim sloping up to the broad backrest end

01 / 02

Egg-Shaped Slipper Freestanding Tub, Sloped Rim, 59 & 67 in

SKU D-8350-150

Size

Certification

cUPC listed

Min. order

40 pcs (59 in) / 35 pcs (67 in) · 1×40HQ

Lead time

30–45 days

Reply time

12 business hours

Material Acrylic

Type Freestanding bathtub

Size 59" × 31.5" × 25.6" (1500 × 800 × 650 mm) Custom sizes

Mount Freestanding

Finish

White

Product PDF D-8350-150

SANIKB D-8350 is an egg-shaped, single-slipper acrylic freestanding bathtub in white. Its rim rises from 600 mm (23.6 in) at the narrow drain end to 650 mm (25.6 in) at the broad backrest end. Two sizes share the 800 mm width: 1500 × 800 × 650 mm (59 × 31.5 × 25.6 in) for D-8350-150 and 1700 × 800 × 650 mm (67 × 31.5 × 25.6 in) for D-8350-170. The sides taper to a smaller flat base, and the rim has no tap holes, so it takes a floor-standing or wall-mounted filler.

D-8350 is cUPC certified; send a quote request and the reply arrives within 12 business hours. Related models are in the slipper tubs collection.

Product PDF D-8350-150

More in Slipper Tubs

MOQ per model · one 40HQ container, quantity set by tub size

View all 33

Tub sheet

Size and installation of D-8350

Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.

Size range59" / 67" × 31.5" × 25.6" (1500 / 1700 × 800 × 650 mm)

Sizes59" x 31"67" x 31"

InstallationFreestanding

Finish White

MaterialAcrylic

Order codes

SKU	Size
D-8350-150	59" x 31"
D-8350-170	67" x 31"

Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.

Compare · 2 sizes

Size & spec comparison

MaterialAcrylic

TypeFreestanding bathtub

MountingFreestanding

MOQ40 pcs (59 in) / 35 pcs (67 in) · 1×40HQ

	59" x 31"D-8350-150	67" x 31"D-8350-170
Overall L×W×D	59″ × 31.5″ × 25.6″ 1500 × 800 × 650 mm	67″ × 31.5″ × 25.6″ 1700 × 800 × 650 mm

Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.

Send a spec. Get a real quote in 12 business hours.

Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.

One itemised quote — not five

Feasibility & certification checked per market

Have a spec file? Email it with your reference number

— Project brief B2B only

Enquiry about Egg-Shaped Slipper Freestanding Tub, Sloped Rim, 59 & 67 in SKU D-8350-150

First name * Please enter your first name.

Company * Please enter your company name.

Email * Please enter a valid email.

WhatsApp (optional)

Comment *

Attachments (optional)

Drag & drop or browse PDF / IMG / XLS · 4MB ×3

Engineer reply within 12 business hours

12 consecutive years at KBIS and IBS.

— Most recent

Feb 2026 KBIS· Orlando, USA

Mar 2026 Expo Revestir· São Paulo, Brazil

16 years on the floor · 6 international shows annually

2026Expo Revestir

São Paulo, Brazil

2026KBIS

Orlando, Florida

2025KBIS

Las Vegas, USA

2025The Big 5

Dubai, UAE

2024IBS

Orlando, USA

2024Expo Guadalajara

Guadalajara, Mexico

2023Canton Fair

Guangzhou, China

2019Cersaie

Bologna, Italy

2018ISH

Frankfurt, Germany

2017The Big 5

Dubai, UAE

2014KBIS

Las Vegas — US debut

2012BAU

Munich, Germany

Standard on every shipment.

UDEM CE technical inspection certificate

Plan & Profile

Broad backrest end, narrow drain end

The drawing shows an asymmetric egg plan: one end is broad and round, the other narrows to a point. The rim slopes from 650 mm at the broad end down to 600 mm at the narrow end.

01 / PLAN

Egg outline with no flat side

No side of the tub is straight, so D-8350 is meant to stand away from the walls. The broad end, where the rim is highest, gives room for the shoulders.

02 / DRAIN END

Drain and overflow at the narrow end

The drain and overflow are placed at the narrow, lower end, away from the backrest. Plan the floor waste and a floor-mounted filler around that end.

Other deep soaking profiles can be compared in the soaking tub range.

Fit & Drawing

800 mm wide, 59 in or 67 in long

Both SKUs are 800 mm (31.5 in) wide with a 650 mm (25.6 in) high end and a 600 mm (23.6 in) low end. The length is 1500 or 1700 mm.

D-8350-150: 59" × 31.5" × 25.6" (1500 × 800 × 650 mm)
D-8350-170: 67" × 31.5" × 25.6" (1700 × 800 × 650 mm)
Installation: Freestanding, flat to floor
Faucet Mounting: No tap holes; floor-standing or wall-mounted filler

Inside, the well is 455 mm and 470 mm deep (17.9 and 18.5 in) on the dimension drawing. The drain sits at the narrow end, so the floor waste goes under the low end of the rim.

Read the inner depths off the approved drawing for the chosen size before specifying.

Construction & Finish

White pure acrylic with a thin rim

D-8350 is made from pure acrylic sheet in white, and the thin rim follows the slope from end to end.

White

Sheen agreed on the sample

D-8350 is made in white; the surface finish is agreed on the approved sample, which then serves as the reference for production.

The pointed narrow end and the sloped rim are the edges most likely to be knocked in handling. Ask how both are padded in the carton.

Put the arrival inspection and replacement arrangements for damaged tubs into the purchase terms.

Open and inspect cartons before the delivery is signed off where possible.

Compliance

cUPC certification for D-8350

Drawing with the documents

Keeping the D-8350 dimension drawing beside the certificate means installers work from the same figures as the approval file.

D-8350 is cUPC certified. Before submittal, ask for the certificate number, its validity and the dimension drawing for D-8350-150 and D-8350-170 in one pack.

Let us know the market the tubs are going to, and we will answer in writing within 12 business hours.

Procurement

Ordering D-8350

The two D-8350 sizes are quoted line by line, and the 1500 mm and 1700 mm units share a lead time of 30-45 days after sample approval.

Standard Lead Time: 30-45 days after sample approval
Quote Reply: within 12 business hours

Use the sample to check the slope from the 650 mm end to the 600 mm end against the bathroom elevation before production starts.

Include these details with the RFQ

Quantities for D-8350-150 and D-8350-170
Floor or wall faucet location
Drain and overflow trim
Destination market and port
Brand marking and carton labels
Requested shipping window for D-8350

Request D-8350 Quote View OEM & ODM Program

Until a quotation is issued, read the lead time as a guide.

How we work

From enquiry to shipment

A factory-direct process built for importers, distributors and project buyers. No trading layer in between.

01

Send the enquiry

Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
Replied within 12 business hours
02

Our sales team contacts you

A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
Email or WhatsApp
03

Quotation

You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
FOB or CIF
04

Sample approval

We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
Before mass production
05

Production and shipment

Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
30–45 days after approval

50+ New models developed every year, tracking current North American and European trends

12 business hours Maximum first response to an enquiry

Since 2000 Foshan factory, B2B trade only

OEM and ODM to your specification

We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.

Your logo on product, carton and documentation
Private-label packaging and manuals
Custom finish matched to your standard
Custom dimensions and tooling where volume supports it
Product development from your reference or price target
Destination-market documentation prepared on request

Get a quote View OEM & ODM program

FAQs

What are the sizes of D-8350?

The 1500 mm size, D-8350-150, measures 1500 × 800 × 650 mm (59 × 31.5 × 25.6 in); the 1700 mm size, D-8350-170, measures 1700 × 800 × 650 mm (67 × 31.5 × 25.6 in). Both drop to 600 mm (23.6 in) at the low end.

How is the D-8350 backrest arranged?

D-8350 is a single slipper. The rim climbs from the narrow drain end to the broad backrest end, which is the highest point at 650 mm.

How deep is D-8350 inside?

The dimension drawing marks inner depths of 455 mm and 470 mm (17.9 and 18.5 in). Read both figures from the approved drawing of the size you order.

Which faucet types suit D-8350?

D-8350 has no tap holes in the rim, so it takes a floor-standing or wall-mounted filler. Plan its position around the narrow end, where the drain and overflow are located.

What does the D-8350 base look like?

The sides taper to a smaller flat base with no feet, which rests directly on the floor. Use the drawing to position the floor waste.

What information does a D-8350 quotation need?

Quantities per SKU, the faucet location and the destination port. We answer within 12 business hours, and D-8350 production runs on a lead time of 30-45 days after sample approval.