Egg-Shaped Oval Freestanding Tub with Rounded Sides, 63 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB FT042 is an egg-shaped, true-oval freestanding bathtub in gloss white acrylic whose sides bulge outward below a slim rim instead of tapering in a straight line. It is made in one size, SKU FT042, at 1600 × 800 × 550 mm (63 × 31.5 × 21.7 in). Both ends are backrests and a round overflow cap sits on the wall. The slim rim has no tap holes, so a floor-standing or wall-mounted filler is used with FT042. The tub rests directly on the floor.
See straight-sided and tapered shapes in the SANIKB freestanding bathtubs collection.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of FT042
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape
Egg-shaped oval with rounded, bulging sides
FT042 is a true oval in plan, egg-shaped rather than stadium-shaped, and its sides swell outward in a rounded curve. A slim rim runs around the top.
Convex walls
The walls curve outward instead of running in a straight taper, giving the body a rounded, vessel-like profile.
Round overflow cap, no tap holes
A round overflow cap sits on the wall. The rim above it has no tap holes, so the filler for FT042 stands on the floor or is set on the wall.
For straight-sided stadium outlines at the same 1600 mm length, see the freestanding bathtub range.
Fit & Height
1600 × 800 mm with a 550 mm rim height
FT042 is made in one size, SKU FT042, at 63 by 31.5 by 21.7 inches (1600 by 800 by 550 mm). The tub rests flat on the floor without feet.
- Overall Size
- 63" × 31.5" × 21.7" (1600 × 800 × 550 mm)
- Installation
- Freestanding, flat to the floor
- Faucet Mount
- Floor-standing or wall-mounted
- Overflow
- Round overflow cap on the wall
The overall height is 550 mm (21.7 in), so set the spout height of a floor-standing faucet against this lower rim. Bulging sides can carry the full width of the body below the rim, so take wall clearances from the drawing rather than from the rim line alone.
Confirm the overflow side and drain position on the approved drawing.
Construction & Finish
Gloss white acrylic sheet
FT042 is formed from pure acrylic sheet and finished in gloss white over its convex, egg-shaped walls.
White
Gloss on a curved body
Gloss white is the finish on FT042. Check the approval sample before sign-off if the finish has to match a basin or toilet in the same room.
The bulging sides are the first surface to touch a carton wall, so ask for side padding as well as rim protection when packing is agreed.
Record the condition of the sides and overflow cap on delivery, before installation.
Compliance
Compliance documents for FT042
Reference the single SKU in the request so the certificate and drawing set belong to the 1600 mm size.
Compliance documents for FT042 are matched to your destination market. Ask for the document references and expiry before the submittal is prepared, and state where the tubs are being shipped.
Document questions sent with the enquiry are answered within 12 business hours.
Procurement
Ordering FT042
FT042 is made as a single SKU, FT042.
- SKU
- FT042
- Standard Lead Time
- 30-45 days after sample approval
Use the sample to approve the curve of the sides and the overflow cap; lead time runs from that approval. Private label marking for FT042 goes through the SANIKB OEM and ODM program.
Include these details with the RFQ
- Quantity of FT042
- Filler type: floor-standing or wall-mounted
- Overflow side and drain position on the drawing
- Destination market and port
- Certificates required
- Target ship date
Lead time stays indicative until the quotation is issued.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request