Egg-Shaped Freestanding Bathtub, Single-Ended, 59 & 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8317 is an egg-shaped acrylic freestanding bathtub: broad and rounded at the backrest end, then narrowing toward the opposite end, where the drain and overflow sit. The slim rim stays level along its length instead of rising like a slipper tub. D-8317 is made in white in two sizes: D-8317-150 at 1500 × 780 × 600 mm (59 × 30.7 × 23.6 in) and D-8317-170 at 1700 × 800 × 600 mm (67 × 31.5 × 23.6 in).
The rim has no tap holes; D-8317 takes a floor-standing or wall-mounted filler. It is made by SANIKB for distributors, contractors and hotel projects; see the SANIKB freestanding bathtub range.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8317
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8317-150 | 59" x 31" |
| D-8317-170 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 59" x 31"D-8317-150 | 67" x 31"D-8317-170 | |
|---|---|---|
| Overall L×W×D | 59″ × 30.7″ × 23.6″ 1500 × 780 × 600 mm | 67″ × 31.5″ × 23.6″ 1700 × 800 × 600 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Layout
Egg-shaped plan with the backrest at the wide end
D-8317 has an asymmetric egg plan: a broad round end that tapers to a narrower opposite end. Unlike a slipper tub, the rim does not climb at the backrest; it stays level all the way round.
Single-ended, sloped wall at the broad end
The wall at the broad end is drawn with more slope than the opposite end, which makes it the backrest. The bather faces the narrow end.
Drain centered on the width, toward the narrow end
On the drawing the drain sits 1220 mm from the wide end on the 1700 mm size and 1020 mm on the 1500 mm size. Across the width it is centered, 400 mm and 390 mm from the side.
Buyers comparing freeform shapes usually shortlist on plan outline and backrest position first. The rest of the line is in the freestanding bathtub range.
Fit & Footprint
Two lengths, 1500 and 1700 mm, both 600 mm high
D-8317 is made in two sizes. The 1500 mm version is 780 mm (30.7 in) wide and the 1700 mm version is 800 mm (31.5 in) wide; both stand 600 mm (23.6 in) tall.
- D-8317-150
- 59" × 30.7" × 23.6" (1500 × 780 × 600 mm)
- D-8317-170
- 67" × 31.5" × 23.6" (1700 × 800 × 600 mm)
- Installation
- Freestanding; no tap holes, floor or wall filler
- Inner Depth (drawing)
- 450 mm at the wide end, 470 mm at the drain
Because the plan narrows toward the drain, the tub looks different from each side of the room. Decide whether the filler sits by the broad backrest end or the narrow drain end before the floor layout is fixed.
Drain setting-out figures come from the drawing. Confirm them on the approved drawing for your order before the floor waste is cut in.
Material & Finish
Acrylic shell in white
D-8317 is formed from pure acrylic sheet and made in white. The rim is slim and level.
White
One color, two lengths
Both D-8317 sizes are made in white. Where one project takes both lengths, ask for them in the same production run.
Acrylic surfaces mark if cartons are dragged or stacked on edge. Agree the packing method, and how transit damage is recorded and reported, before the goods ship.
The surface sheen is confirmed on the approval sample before bulk production.
Compliance
Compliance documents for D-8317
Ask for documents against D-8317-150 or D-8317-170 by name so each size in the order is covered.
When you prepare a submittal, request the current compliance documents against the model number so the paperwork matches the destination market.
State the market and the documents you need in the inquiry. Written replies are issued within 12 business hours.
Procurement
Ordering D-8317 in one or both lengths
D-8317 is quoted by SKU. Lead time runs 30-45 days after sample approval.
- Standard Lead Time
- 30-45 days after sample approval
- SKUs
- D-8317-150, D-8317-170
Lead time is counted from sample approval, so build the sample stage into the project schedule. Other models for the same project can be chosen from the SANIKB bathtub range.
Include these details with the RFQ
- Quantity per SKU (D-8317-150, D-8317-170)
- Destination market and port
- Faucet arrangement: floor-standing or wall-mounted
- Documents required for the submittal
- Brand marking on carton
- Requested shipping window
Treat the lead time as indicative until the quotation is issued.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request