D-Shape Back-to-Wall Bathtub with Wide Rear Tap Deck, 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8502 is a D-shaped acrylic back-to-wall bathtub built around a wide rear tap deck. The back rim is wider than the front and takes a 5-piece deck-mounted tap set; whether the tap set is supplied is agreed at quotation. The straight back stands against the wall, leaving the rounded front and both ends exposed. D-8502 is made in one size, SKU D-8502-170: 1700 × 800 × 580 mm (67 × 31.5 × 22.8 in).
Both ends are backrests, the drain is at the center, and the base is 1340 mm (53 in) long under the 1700 mm rim. D-8502 is glossy white and is quoted within 12 business hours. Browse SANIKB freestanding bathtubs.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8502
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Tap Deck
Straight back, rounded front, rear tap deck
D-8502 is a D shape: the back is straight so it stands against a wall, while the front and both ends are rounded. On the drawing the basin floor sits 200 mm (7.9 in) from the back edge and 130 mm (5.1 in) from the front edge.
5-piece tap set on the back deck
The flat back deck takes a 5-piece deck-mounted tap set along the wall side. Tap scope and hole positions are agreed at quotation and confirmed on the approved drawing.
Two sloped ends, center drain
Both ends are shaped as backrests and the drain sits at the center. Inner depth runs 445, 470 and 445 mm (17.5, 18.5 and 17.5 in) along the length.
A back-to-wall D-shape keeps the tub against the wall where a fully freestanding tub would leave an unused gap behind it. Compare it with other shapes in the SANIKB bathtub range.
Fit & Footprint
1700 × 800 mm with a 1340 mm base
D-8502 measures 1700 × 800 × 580 mm (67 × 31.5 × 22.8 in). Along the length, 300 mm (12 in) ends frame an 1100 mm (43 in) inner basin.
- Overall Size
- 67" × 31.5" × 22.8" (1700 × 800 × 580 mm)
- Installation
- Back-to-wall, flat to floor
- Faucet Mount
- Deck-mounted on the back deck
- Backrest
- Double-ended, center drain
The base is 1340 mm (53 in) long, against the 1700 mm overall length. Across the 800 mm width, the drawing gives 200 mm from the back edge to the basin floor, a 470 mm (18.5 in) basin floor and 130 mm from the floor to the front edge.
The flat back and its square corners are confirmed on the approved drawing before the layout is fixed.
Construction & Finish
Acrylic in glossy white
D-8502 is formed from pure acrylic sheet and finished in white with a gloss surface.
White
One color, one finish
D-8502 is made in white, so every unit in an order arrives in the same finish.
Because the back deck carries the taps, the rim on that side is wider than at the front. Allow for the deck width when the supply lines are positioned in the wall behind.
Ask how the tub is protected in its carton and how damaged units are recorded on arrival.
Put a damage-reporting window into the supply agreement.
Compliance
Compliance documents for D-8502
Ask for the certificate and drawing under D-8502 by name, separate from any other tubs in the same order.
Compliance documents for D-8502 are matched to your destination market. Request the document references and their validity against this model for your submittal package.
State the target market and the paperwork required when you send the inquiry; written replies come back within 12 business hours.
Procurement
Ordering D-8502
D-8502 is made in one size, SKU D-8502-170. Quantity and tap scope are set in the quotation.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- Sent within 12 business hours
Lead time runs from sample approval, so the sample round belongs in the project schedule. For private label packaging and marking, see the SANIKB OEM and ODM program.
Include these details with the RFQ
- Quantity of D-8502-170
- Target market and port of discharge
- Tap scope for the back deck
- Brand marking on the carton
- Shipping window
The lead time shown is indicative until it is written into the quotation.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request