D-Shape Back-to-Wall Bathtub with Molded Center Tap Platform, 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8011T is a D-shaped acrylic back-to-wall bathtub with a slim rim and a molded tap platform set in the middle of its straight back. The platform takes deck-mounted taps, so the rest of the rim stays narrow and the taps sit centered on the tub rather than at one end. D-8011T is made in one size, SKU D-8011T-170: 1700 × 800 × 580 mm (67 × 31.5 × 22.8 in). The front and both ends are rounded, both ends are backrests, and the tub stands flat on the floor.
The platform is molded into the glossy white acrylic shell; its hole layout is confirmed on the approved drawing, and whether taps are supplied is agreed at quotation. SANIKB answers quote requests within 12 business hours. View SANIKB freestanding bathtubs.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8011T
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Tap Platform
Slim rim with a molded platform for taps
D-8011T keeps a slim rim all round except at the middle of the straight back, where a molded platform carries deck-mounted taps.
Taps at the center of the back
The platform sits midway along the wall side, so the taps are centered on the tub rather than placed at one end. Whether taps are part of the order, and how the platform is drilled, are agreed at quotation.
Rounded ends shaped as backrests
Both ends are backrests, so the bather can recline at either end. The front and ends are rounded, and the straight back stands against the wall.
Inner length and drain position are confirmed on the approved drawing; compare D-8011T with the other D-shapes in the SANIKB bathtub range.
Fit & Footprint
1700 × 800 mm back-to-wall footprint
D-8011T-170 measures 1700 × 800 × 580 mm, or 67 × 31.5 × 22.8 in, with the tap platform at the middle of the wall side.
- Overall Size
- 67" × 31.5" × 22.8" (1700 × 800 × 580 mm)
- Installation
- Back-to-wall, flat to floor
- Faucet Mount
- Deck-mounted on a molded back platform
Inner length, drain position and platform width are confirmed on the approved drawing, so take them from there before the room layout is fixed.
Route the tap supplies to the middle of the back wall, where the platform sits.
Construction & Finish
Glossy white acrylic with a slim rim
D-8011T is made from pure acrylic sheet in white, with a gloss surface.
White
One finish for the order
D-8011T is made in white. Keeping every unit in the same color and gloss level avoids mismatched tubs between rooms.
The slim rim keeps the visible edge light; the only wide section is the tap platform on the wall side.
Agree carton protection for the rim and platform edges, and how transit damage is reported, before shipment.
Note any damage on the delivery receipt and report it inside the agreed window.
Compliance
D-8011T compliance documents
Certificates and drawings are issued under D-8011T by name. Put other models in the same order on separate lines.
Compliance documents for model D-8011T are matched to your destination market. Ask for the current document references and validity dates tied to this model before it enters a submittal.
Tell SANIKB the destination market and which documents the project file needs; the written reply is sent within 12 business hours.
Procurement
Quoting D-8011T
D-8011T is made in one size, SKU D-8011T-170. Tap scope and quantity are agreed in the quotation.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- Sent within 12 business hours
Production follows sample approval, and the standard window runs 30-45 days after sample approval. Private label marking goes through the SANIKB OEM and ODM program.
Include these details with the RFQ
- Quantity of D-8011T-170
- Market and destination port
- Whether taps for the platform are required
- Carton marking and brand label
- Target shipping window
Lead time is indicative until it is confirmed in the quotation.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request