01
Standard
Use the Standard configuration where the faucet deck and basin rim are relatively close in height. Confirm the dimensions from the Standard SKU drawing against the selected basin or vanity before approval.
01
/ 08
01
/ 08
Cylindrical Gooseneck Bathroom Faucet FYF-01079
Finish
Height
Certification
Min. order
100 pcs
Lead time
30–45 days
Reply time
12h
Material
304 stainless steel
Type
Single-hole bathroom faucet
Size
7.8" H × 5.7" spout reach (198.8 × 146 mm)
Custom sizes
Mount
Deck-mounted single hole
FYF-01079 is a cylindrical gooseneck bathroom faucet with a slim round body, curved spout and single-handle control. It is available in Standard and Tall Vessel configurations, with Brushed Nickel, Matte Black and Brushed Gold finish options.
This page is intended for distributors, importers, private-label buyers, hospitality procurement teams and multifamily project buyers evaluating FYF-01079 for bulk supply. It covers the differences between the two height configurations, finish options, basin and spout planning, installation requirements, certification considerations and the information needed for an accurate RFQ.
These details matter because faucet height, spout position and basin geometry should be checked together before a project quantity is approved. For the Standard Brushed Nickel SKU, FYF-01079BN-S, the published dimensions are 7.8 inches overall height with a 5.7-inch spout reach. The current minimum order is 100 pieces, with a stated production lead time of 30–45 days after sample approval.
Buyers comparing other configurations can browse SANIKB’s bathroom faucet range.
Configurations
6 factory configurations of FYF-01079
Every option below is a produced configuration with its own SKU. 3 finishs × 2 heights . Name the exact SKU on each purchase order line.
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Send a spec. Get a real quote in 12h.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
One itemised quote — not five
Feasibility & certification checked per market
Have a spec file? Email it with your reference number
12 consecutive years at KBIS and IBS.
— Most recent
Feb 2026
KBIS· Orlando, USA
Mar 2026
Expo Revestir· São Paulo, Brazil
Standard on every shipment.
Product Family
Cylindrical Body with a Curved Gooseneck Spout
FYF-01079 is ordered by combining a finish with a height configuration. Treat each combination as a distinct SKU when preparing samples, project schedules, submittals and purchase documentation.
This matters because the specification for one variant should not automatically be applied to another. Use the SKU shown for the selected finish and height when checking dimensions, drawings, documentation or order details.
01
Brushed Nickel
Standard
SKU FYF-01079BN-S
02
Brushed Nickel
Tall Vessel
SKU FYF-01079BN-T
03
Matte Black
Standard
SKU FYF-01079BK-S
04
Matte Black
Tall Vessel
SKU FYF-01079BK-T
05
Brushed Gold
Standard
SKU FYF-01079BG-S
06
Brushed Gold
Tall Vessel
SKU FYF-01079BG-T
Height Selection
How to Choose Between Standard and Tall Vessel
02
Tall Vessel
Use the Tall Vessel configuration where an above-counter basin raises the rim above the faucet deck. Review the drawing for the selected Tall Vessel SKU rather than applying dimensions from a Standard version.
Selection note:
height alone does not determine basin fit. Check spout reach, outlet height, basin rim, bowl depth and handle clearance together.
For other one-hole layouts, see SANIKB’s
single-hole bathroom faucet collection
.
Variant Control
Keep Finish and Height Linked Through the Order
Brushed Nickel
Matte Black
Brushed Gold
Use the exact SKU on project documents
Once a finish and height are selected, carry the resulting SKU through the sample request, quotation, project schedule and purchase documentation. This reduces the risk of a Standard drawing or specification being matched to a Tall Vessel variant, or vice versa.
For routine finish care, use a soft cloth with mild soap and clean water, then wipe the faucet dry. Avoid abrasive cleaners or aggressive chemicals unless compatibility with the selected finish has been confirmed.
Project Review
What to Verify Before Approving an FYF-01079 Variant
Use the drawing or specification sheet for the selected SKU rather than relying on dimensions from another finish-height combination.
Mounting Format
Deck Mounted
Single Hole
Single Hole
Review the selected variant against the actual basin, countertop and plumbing layout before project approval.
- Exact FYF-01079 SKU
- Selected finish and height configuration
- Overall faucet height on the selected drawing
- Spout reach and outlet height
- Basin rim height and bowl depth
- Countertop or basin mounting-hole requirement
- Rear clearance for handle operation
- Supply and connection specifications
- Required flow rate or water-efficiency criteria
- Certification and submittal requirements
Compliance & Procurement
Verify Certification Against the Exact SKU
cUPC
Confirm variant-level coverage
Certification requirements should be checked against the exact SKU and destination market before order approval. Do not assume that documentation for one finish or height configuration automatically covers all six FYF-01079 variants.
Include required certification or submittal documents in the RFQ so the selected SKU can be reviewed against the appropriate listing.
Verify listings with IAPMOConfirm project-specific specifications
Where a project specifies a particular flow rate, water-efficiency criterion, connection requirement or approval document, include it with the selected SKU rather than assuming the requirement is the same for every order.
Branding and packaging requirements can be reviewed through SANIKB OEM & ODM services . For available inspection information, see QC & Testing .
Quote Preparation
What to Include in an FYF-01079 RFQ
Identify the exact variant first, then provide the project details needed to confirm specifications, documentation and quotation.
01
Selected SKU
Use the SKU created by the chosen finish and height
02
Finish & Height
Confirm both selections even when the SKU is provided
03
Required Quantity
Expected purchasing or project volume
04
Destination Market
Country or market where the faucet will be supplied
05
Basin or Vanity Details
Relevant dimensions or project drawings where available
06
Technical Requirements
Flow rate, connections or water-efficiency criteria
07
Required Documentation
Certification, submittal or approval requirements
08
Branding & Delivery
Private-label needs, packaging and target delivery timing
If the selected FYF-01079 variant will be paired with a specified basin or vanity, include the relevant drawing or dimensions so the product team can review fit and installation conditions before approval.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
50+
New models developed every year, tracking current North American and European trends
12h
Maximum first response to an enquiry
Since 2000
Foshan factory, B2B trade only
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request