Home› Bath & Fixtures› Shower & Bath› Bathtubs› D-8021-150

SANIKB D-8021 - white rectangular freestanding tub with flat sides and curved ends over a smaller flat base

01 / 02

Cradle-Profile Rectangular Freestanding Tub, Double Ended, 59 & 67 in

SKU D-8021-150

Size

Certification

cUPC listed

Min. order

40 pcs (59 in) / 35 pcs (67 in) · 1×40HQ

Lead time

30–45 days

Reply time

12 business hours

Material Acrylic

Type Freestanding bathtub

Size 59" × 29.5" × 23.6" (1500 × 750 × 600 mm) Custom sizes

Mount Freestanding

Finish

White

Product PDF D-8021-150

SANIKB D-8021 is a double ended rectangular freestanding bathtub in white acrylic. Its long sides run flat, while both end walls curve down to a smaller flat base, giving a cradle-like side profile under a thin, sharp-cornered rim. Two lengths are offered: D-8021-150 at 1500 x 750 x 600 mm (59 x 29.5 x 23.6 in) and D-8021-170 at 1700 x 750 x 600 mm (67 x 29.5 x 23.6 in).

The drain sits at the center of the tub. The rim has no tap holes, so D-8021 takes a floor-standing or wall-mounted filler. D-8021 carries cUPC certification, and every quote goes out within 12 business hours. More profiles are in the freestanding bathtub collection.

Product PDF D-8021-150

More in Freestanding Bathtubs

MOQ per model · one 40HQ container, quantity set by tub size

View all 152

Tub sheet

Size and installation of D-8021

Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.

Size range59" / 67" × 29.5" × 23.6" (1500 / 1700 × 750 × 600 mm)

Sizes59" x 30"67" x 30"

InstallationFreestanding

Finish White

MaterialAcrylic

Order codes

SKU	Size
D-8021-150	59" x 30"
D-8021-170	67" x 30"

Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.

Compare · 2 sizes

Size & spec comparison

MaterialAcrylic

TypeFreestanding bathtub

MountingFreestanding

MOQ40 pcs (59 in) / 35 pcs (67 in) · 1×40HQ

	59" x 30"D-8021-150	67" x 30"D-8021-170
Overall L×W×D	59″ × 29.5″ × 23.6″ 1500 × 750 × 600 mm	67″ × 29.5″ × 23.6″ 1700 × 750 × 600 mm

Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.

Send a spec. Get a real quote in 12 business hours.

Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.

One itemised quote — not five

Feasibility & certification checked per market

Have a spec file? Email it with your reference number

— Project brief B2B only

Enquiry about Cradle-Profile Rectangular Freestanding Tub, Double Ended, 59 & 67 in SKU D-8021-150

First name * Please enter your first name.

Company * Please enter your company name.

Email * Please enter a valid email.

WhatsApp (optional)

Comment *

Attachments (optional)

Drag & drop or browse PDF / IMG / XLS · 4MB ×3

Engineer reply within 12 business hours

12 consecutive years at KBIS and IBS.

— Most recent

Feb 2026 KBIS· Orlando, USA

Mar 2026 Expo Revestir· São Paulo, Brazil

16 years on the floor · 6 international shows annually

2026Expo Revestir

São Paulo, Brazil

2026KBIS

Orlando, Florida

2025KBIS

Las Vegas, USA

2025The Big 5

Dubai, UAE

2024IBS

Orlando, USA

2024Expo Guadalajara

Guadalajara, Mexico

2023Canton Fair

Guangzhou, China

2019Cersaie

Bologna, Italy

2018ISH

Frankfurt, Germany

2017The Big 5

Dubai, UAE

2014KBIS

Las Vegas — US debut

2012BAU

Munich, Germany

Standard on every shipment.

UDEM CE technical inspection certificate

Profile & Ends

Flat sides, curved ends, cradle-like base

D-8021 keeps its long sides flat and brings both end walls down in a curve to a base smaller than the rim. The rim is thin, with sharp corners on a square-cornered rectangular plan.

01 / END WALLS

Matching curves at both ends

Both ends of D-8021 are shaped the same, so either one can serve as the backrest. The curve pulls the base in from the rim outline at floor level.

02 / RIM

Thin rim with square corners

The rim is a slim edge rather than a deck, with no tap holes. Plan a floor-standing or wall-mounted filler whose spout reaches past the thin edge.

Other rectangular and oval shapes sit in the freestanding bathtub range.

Fit & Drain

59 or 67 in long, 750 mm wide

Both D-8021 lengths are 750 mm (29.5 in) wide and 600 mm (23.6 in) high. The drawing puts the inner depth at 460 to 470 mm (18.1 to 18.5 in).

D-8021-150: 59" × 29.5" × 23.6" (1500 × 750 × 600 mm)
D-8021-170: 67" × 29.5" × 23.6" (1700 × 750 × 600 mm)
Drain Position: Center: 750/850 mm from the end, 375 mm from the side
Faucet Mounting: Floor-standing filler or wall-mounted spout

Because the drain is centered on both axes, the floor waste lands in the middle of the footprint: 750 mm in from the end on the 1500 mm tub and 850 mm on the 1700 mm tub, 375 mm from either long side. Leave room to clean around the curved ends, since the base sits inside the rim line.

Confirm the drain coordinates for the chosen length on the approved drawing before the waste is set in the floor.

Material & Finish

White acrylic, no feet or plinth

D-8021 is formed from pure acrylic sheet in white and stands directly on the floor with no feet or plinth.

White

One white for both lengths

Ordering the 1500 mm and 1700 mm tubs in the same white keeps a mixed-size project consistent from room to room.

The surface sheen of D-8021 is confirmed on the approval sample, so check it there before the order is released.

Record the sample's finish as the reference for incoming inspection.

Compliance

cUPC certification for D-8021

Two SKUs, one model file

Keep D-8021 paperwork under the model number, with the SKU list attached for the project record.

D-8021 is cUPC certified. Ask for the certificate to name both D-8021-150 and D-8021-170 so either length can go into a submittal without a second request.

State the destination market when you enquire, and the document set will be prepared against it. Written answers to enquiries go out within 12 business hours.

Procurement

Ordering D-8021

Quote each D-8021 length as its own line, with a lead time of 30-45 days after sample approval.

Standard Lead Time: 30-45 days after sample approval
Quote Reply: within 12 business hours

Use the sample to check how the curved ends meet the floor and how the thin rim edge is finished before production starts.

Include these details with the RFQ

Quantity per SKU: D-8021-150, D-8021-170
Floor or wall faucet plan
Sample SKU to approve
Destination market and port
Carton marking and labels
Target shipping window

Request D-8021 Quote View OEM & ODM Program

Lead time is counted from the day the sample is approved.

How we work

From enquiry to shipment

A factory-direct process built for importers, distributors and project buyers. No trading layer in between.

01

Send the enquiry

Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
Replied within 12 business hours
02

Our sales team contacts you

A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
Email or WhatsApp
03

Quotation

You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
FOB or CIF
04

Sample approval

We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
Before mass production
05

Production and shipment

Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
30–45 days after approval

50+ New models developed every year, tracking current North American and European trends

12 business hours Maximum first response to an enquiry

Since 2000 Foshan factory, B2B trade only

OEM and ODM to your specification

We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.

Your logo on product, carton and documentation
Private-label packaging and manuals
Custom finish matched to your standard
Custom dimensions and tooling where volume supports it
Product development from your reference or price target
Destination-market documentation prepared on request

Get a quote View OEM & ODM program

FAQs

What are the two D-8021 lengths and their SKUs?

Two sizes: D-8021-150 at 1500 x 750 x 600 mm (59 x 29.5 x 23.6 in) and D-8021-170 at 1700 x 750 x 600 mm (67 x 29.5 x 23.6 in). Width and height stay the same; only the length changes.

Which end of D-8021 do bathers lean against?

Either. D-8021 is double ended, with both end walls curved the same way and the drain at the center, so the tub can face whichever way suits the room.

Where does the faucet for D-8021 mount?

The rim has no tap holes, so D-8021 takes a floor-standing or wall-mounted filler. For a wall spout, set the tub close enough to the wall for the outlet to reach past the rim.

What does installing D-8021 involve?

D-8021 sits flat on the finished floor. The drain is at mid-length and mid-width, 750 or 850 mm from the end and 375 mm from the side, so the waste connection is set in the floor before the tub goes in.

What is D-8021 made of, and in what color?

D-8021 is white throughout and is formed from pure acrylic sheet; its surface sheen is confirmed on the approved sample.

How do we order and how long does production take?

Send quantities per SKU, the destination market and the faucet plan. Quotes come back within 12 business hours, and lead time is 30-45 days after sample approval.