Classic Rolled-Lip Freestanding Tub on Wide Stepped Plinth, 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8318 is a classic double-ended freestanding bathtub in gloss white acrylic. A thick rolled lip overhangs the body at the top, and the tub stands on a stepped, molded plinth that is wider than the shell above it. A centered drain pairs with an overflow placed half-way along one long side. It is made in one size, SKU D-8318, at 1700 × 800 × 600 mm (67 × 31.5 × 23.6 in), with a 100 mm (3.9 in) plinth.
The rolled lip has no tap holes; serve the tub with a floor-standing or wall-mounted faucet. Compare other rims in the freestanding bathtub collection.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8318
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Lip & Plinth
A rolled lip on top, a wider plinth below
D-8318 follows a traditional outline. The top edge is a thick rolled lip that overhangs the body, and the base is a stepped plinth that projects past the shell.
Thick rolled lip
The lip rolls outward over the body and finishes the top with a rounded edge in place of a thin rim, and the roll runs round both ends.
Stepped plinth, 100 mm high
The plinth is molded in steps, stands 100 mm (3.9 in) high and projects past the body above it.
Slimmer rims and plain bases are in the freestanding bathtub range.
Fit & Drain
Rolled-lip tub on a 1700 × 800 mm plan, drain mid-plan
D-8318 is 1700 mm (67 in) long, 800 mm (31.5 in) wide and 600 mm (23.6 in) high. The drain sits 850 mm from the end and 400 mm from the side, at the center of the plan.
- D-8318
- 67" × 31.5" × 23.6" (1700 × 800 × 600 mm)
- Inner Depth
- 450 / 470 mm (17.7 / 18.5 in)
- Base
- Stepped plinth, 100 mm (3.9 in)
- Faucet Mounting
- Floor-standing or wall-mounted
Measure clearances from the plinth, which is wider than the body. With the overflow on a long side, agree which side faces into the room before the waste is set.
Confirm the waste position on the approved drawing before the floor is finished.
Material & Finish
Gloss white acrylic in a traditional form
D-8318 is made from pure acrylic sheet with a gloss white finish.
White
Highlights on the roll
The gloss picks out the curve of the rolled lip and the edges of the plinth steps. Match the white tone of lip, body and plinth on the approval sample.
The overhanging lip projects beyond the body and is exposed on every side in the carton. Ask for a padded frame around the lip, and check it for chips at delivery.
Judge the delivered gloss against the approved D-8318 sample.
Compliance
Compliance documents for D-8318
Quote D-8318 on drawings, orders and certificates alike so the paperwork lines up on site.
Compliance documents for D-8318 are matched to your destination market. Request the current document reference against D-8318 for the submittal.
Name the destination market and documents when enquiring; SANIKB confirms them in writing within 12 business hours.
Procurement
Ordering D-8318
The lead time for D-8318 is 30-45 days after sample approval.
- Standard Lead Time
- 30-45 days after sample approval
- Plinth Height
- 100 mm (3.9 in)
Sample approval fixes the lip profile, the plinth steps and the gloss finish before production.
Include these details with the RFQ
- Quantity of D-8318
- Floor-standing or wall-mounted faucet
- Drain and overflow finish
- Destination market and port
- Protection for the rolled lip
- Shipping window
Lead time stands once the quotation is issued.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request