B022 01/02 is a single hole bathroom faucet built around a cylindrical chrome body topped with a long flat blade spout. An oval, pebble-shaped rose gold paddle lever sits on top of the body, and the lever has a ribbed underside.
B022 01/02 is offered in a standard height and a tall vessel height; the tall vessel height is used with vessel basins. Buyers reviewing the full range of bathroom faucets for wholesale and projects can weigh a pebble lever rose gold bathroom faucet against other single-hole configurations before finalizing a purchase order.
Mix any models in one 20ft container · no per-model minimum
B022 27Pebble Lever Chrome & Rose Gold Wall Mount Bathroom Faucet B022 27Wall-mounted
SP021 21Pebble Lever Chrome & Rose Gold Shower Valve Trim Kit SP021 21Wall-mounted trim, in-wall valve
SP022A 13Pebble Chrome & Rose Gold Diverter Shower Valve Trim Kit SP022A 13Wall-mounted trim, in-wall valve
SP022A 22Pebble Concealed Shower System with Rain Head & Slide Bar SP022A 22Wall-mounted, in-wall valve
Model sheet
Every option below is a produced configuration with its own SKU. 1 finish × 2 heights. Name the exact SKU on each purchase order line.
NO. B022 01 74 1
Chrome & Rose GoldStandard
NO. B022 02 74 1
Chrome & Rose GoldTall VesselMixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Pebble Lever tops chrome bodies with an oval, pebble-shaped rose gold paddle lever and a long flat blade spout.
Basin · 01
Basin faucetStandard · Tall
Basin · 02
Wall-mount basin faucetOne quote
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
Design
B022 01/02 is a single hole bathroom faucet in the Pebble Lever series, with an oval paddle lever and a long flat blade spout.
B022 01/02 has a cylindrical chrome body. The long flat blade spout comes from the top of the body.
An oval, pebble-shaped rose gold paddle lever sits on top of the body. The lever has a ribbed underside, and its rose gold tone contrasts with the chrome body.
See the full single hole bathroom faucet range for other single hole configurations.
Fit & Clearance
B022 01/02 is a single hole faucet, so the mounting surface needs one prepared opening sized to this model.
B022 01/02 has no published mounting hole diameter or deck thickness, so confirm against the model spec sheet before a fabricator cuts a basin or countertop.
State the height, standard or tall vessel, on the purchase order, since B022 01/02 is offered in both heights.
Request written confirmation from the factory on deck thickness range before finalizing basin cutouts.
Construction & Finish
B022 01/02 is built in brass, with chrome and rose gold as the only finish stated for this faucet.
Chrome & Rose Gold
The body is chrome and the oval paddle lever on top is rose gold. No alternate finish is stated for this model.
B022 01/02's paddle lever carries the rose gold accent, so request a swatch of both tones before a single hole run is confirmed.
Approve the swatch against B022 01/02's paddle lever, not the body alone, before sign-off.
Compliance
Country, port and the document set your customs broker asks for. That is enough to start the conversation.
B022 01/02 is cUPC listed. The published specification also holds material, type, mount, finish and MOQ. Before it goes into a submittal, request the current listing number and certificate validity so the documentation matches your destination market.
Tell us the destination market and the route your importer follows. We confirm in writing which documents can travel with the goods before production is scheduled.
Procurement
B022 01/02 can share a single quote with its Pebble Lever series siblings.
A single purchase order can combine B022 01/02's two heights with the wall mount and shower pieces of the Pebble Lever series, since all are grouped under the same series name.
Buyers building a private label line around B022 01/02 can review packaging and branding options through the SANIKB OEM and ODM programme.
Send these points together, with the SKU and height on each line.
How we work
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
