Chamfered Basin with Inset Rear Tap Deck
An inward-projecting platform gives the chamfered basin with inset rear tap deck its distinct rear arrangement. D445 places one tap opening on that central ceramic section, whose angled sides create a trapezoid boundary inside the bowl perimeter. The outside form combines four longer straight edges with short diagonal cuts at the corners. Its smooth upright faces remain plain below a narrow angular rim. One separate floor opening sits in the uninterrupted washing area. The white ceramic body is listed for above-counter mounting at 500 × 380 × 140 mm overall. Match the small inset platform with the corner cuts when selecting the design; it does not have a full-width rear tap surface.
Shape & size
Shape and size of D445
One opening on a central rear platform
An inward tap deck with angled side boundaries
The small ceramic platform extends from the rear into the bowl perimeter. Its side boundaries run diagonally toward a shorter inner edge, giving the deck a trapezoid plan.
Long straight sides with short diagonal corner cuts
An angular perimeter around the continuous bowl
Four longer side sections join through four shorter corner cuts. The outside has unequal edge lengths rather than a regular eight-sided plan.
Smooth upright exterior and plain inner surfaces
One separate floor opening beneath the inset platform
The washing area remains a single cavity without a divider. Plain surfaces lead toward the floor opening, separate from the tap position on the rear ceramic deck.
500 × 380 × 140 mm overall
Specify D445’s corner cuts and inset deck together
The outside dimensions enclose the angular rim and its inward rear platform. The catalogue states above-counter mounting and total body height, without separate deck measurements.
D445
500 × 380 × 140 mm
D445 angular body with an inward central rear tap deck
- D445 — 500 × 380 × 140 mm
- Required quantity