Bullnose Rim Rounded Rectangle Freestanding Tub, 68 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB FT008 is a white acrylic freestanding bathtub with a rounded-corner rectangular body, a thick bullnose rim and a base that rests flat on the floor. It is double-ended with a round overflow, and it is made in one size, FT008, at 1730 × 790 × 550 mm (68 × 31.1 × 21.7 in). At 550 mm (21.7 in) high, the rim sits lower than on a 600 mm tub. The rim has no tap holes; fill the tub from a floor-standing or wall-mounted filler.
Quotes for the 68 in FT008 tub are sent within 12 business hours. Compare rim styles across the SANIKB freestanding bathtub collection.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of FT008
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Rim & Body
Thick bullnose rim on a rounded-corner body
FT008 has a rectangular plan with rounded corners and a thick rounded (bullnose) rim. The overflow is a round fitting.
A rounded, thick top edge
The rim is a thick rounded (bullnose) edge rather than a thin one, so the edge a bather holds when stepping in is broad and smooth.
Round overflow, two reclining ends
The overflow is a round fitting in the basin wall. FT008 is double-ended, and both ends are kept for reclining.
Thin-rim alternatives are in the freestanding bathtub collection.
Fit & Footprint
1730 mm long, 550 mm high
FT008 measures 68 by 31.1 by 21.7 inches, given as 1730 by 790 by 550 mm.
- Overall Size
- 68" × 31.1" × 21.7" (1730 × 790 × 550 mm)
- Base
- Flat to floor
- Faucet Mounting
- No tap holes; floor-standing or wall-mounted filler
At 1730 mm, FT008 runs 30 mm past a 1700 mm tub, so measure the room length with clearance at both ends. The thick rim is included in the 790 mm overall width.
Take the FT008 drain position from the approved drawing issued with the quotation.
Construction & Finish
White acrylic with a thick bullnose rim
The body is formed from pure acrylic sheet in white, with a thick rounded (bullnose) rim.
White
A fuller top line
The bullnose rim gives FT008 a thicker top edge than a slim-rim tub, and that edge is the first detail to check on the sample.
FT008 is made in white, and its gloss level is confirmed on the approval sample.
The rounded rim is exposed inside the carton, so ask for edge protection along its full length.
Check the rim for damage as soon as each unit is unpacked and report any marks in writing.
Compliance
Compliance documents for FT008
FT008 has one size, so one SKU covers the certificate, the drawing and the packing list.
Compliance documents for FT008 are matched to your destination market. Ask for the document references and validity date for SKU FT008 ahead of the submittal.
State the destination market with your FT008 enquiry, and SANIKB responds within 12 business hours.
Procurement
Ordering FT008
The bullnose-rim FT008 is built on a lead time of 30-45 days after sample approval.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- within 12 business hours
Approve the rim profile and finish on the sample before production; that sample then serves as the check for every delivered unit.
Include these details with the RFQ
- Quantity of FT008
- Faucet: floor or wall
- Round overflow and drain trim finish
- Destination market and port
- Carton marking
- Requested ship date
Plan freight from the date on the quotation.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request