Bowl-Shaped Double Slipper Freestanding Tub, 59 & 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8316 is a white acrylic double slipper freestanding bathtub: both ends rise above a dipped middle, and the bowl-shaped body tapers to a narrow flat footprint under a slim rim. The drain is centered and the overflow sits at the middle of a long side. Sizes are D-8316-150 at 1500 × 780 × 650 mm (59 × 30.7 × 25.6 in) and D-8316-170 at 1700 × 800 × 650 mm (67 × 31.5 × 25.6 in).
The rim has no tap holes, so D-8316 takes a floor-standing or wall-mounted filler. A quote for one or both sizes goes out within 12 business hours. Compare it in the slipper tub collection.
More in Slipper Tubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8316
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8316-150 | 59" x 31" |
| D-8316-170 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 59" x 31"D-8316-150 | 67" x 31"D-8316-170 | |
|---|---|---|
| Overall L×W×D | 59″ × 30.7″ × 25.6″ 1500 × 780 × 650 mm | 67″ × 31.5″ × 25.6″ 1700 × 800 × 650 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Profile
Bowl-shaped body with two raised ends
D-8316 is symmetric on both axes. The rim stands at 650 mm (25.6 in) at each end and falls to 600 mm (23.6 in) at mid-length, and there is no flat side.
A backrest at each end
Both ends sweep up by the same amount, so the bather can lie back at either end while the drain stays in the middle.
Overflow on the long side
The overflow is set at the middle of one long side rather than at an end, which leaves both end walls clear for reclining.
More designs in this style are grouped under freestanding bathtubs.
Sizes & Drain
Two sizes, 780 or 800 mm wide
D-8316-150 is 59 × 30.7 × 25.6 inches (1500 × 780 × 650 mm). D-8316-170 is 67 × 31.5 × 25.6 inches (1700 × 800 × 650 mm). D-8316-150 is 20 mm narrower as well as 200 mm shorter.
- D-8316-150
- 59" × 30.7" × 25.6" (1500 × 780 × 650 mm)
- D-8316-170
- 67" × 31.5" × 25.6" (1700 × 800 × 650 mm)
- Drain (as drawn)
- Centered: 750 / 390 mm from end / side on the 1500 size, 850 / 400 mm on the 1700 size
- Inner Depth (as drawn)
- 19.9" at the ends, 18.5" at the drain (505 / 470 mm)
The rim has no tap holes, so a floor-standing or wall-mounted filler serves D-8316. The body narrows toward the floor, so the footprint is smaller than the 780 or 800 mm rim width, and wall clearances should be measured at the rim.
Check the D-8316 drain setting on the approved drawing for the size ordered.
Construction & Finish
White acrylic, sheen set on the sample
D-8316 is made from pure acrylic sheet, in white.
White
Surface confirmed at sampling
D-8316 is made in white. The surface sheen is confirmed on the approval sample before the order is released.
The narrow footprint sits flat on the floor. The finished floor should be level before D-8316 is placed and the waste connected.
Keep the approved D-8316 sample for comparison on delivery.
Compliance
D-8316 certification
Documents are issued against D-8316-150 or D-8316-170, so name both if both are ordered.
For the submittal, request the compliance documents for both sizes of D-8316 and their validity from SANIKB.
Include the destination market in the enquiry, plus any documents a local inspector will ask for, and SANIKB answers the D-8316 request within 12 business hours.
Procurement
D-8316 order lines
D-8316-150 and D-8316-170 are quoted separately and produced 30-45 days after sample approval.
- Size SKUs
- D-8316-150, D-8316-170
- Standard Lead Time
- 30-45 days after sample approval
Where a project has both small and standard bathrooms, the two D-8316 sizes let one design run through the building.
Include these details with the RFQ
- Quantities per D-8316 size
- Destination market and port
- Filler: floor-standing or wall-mounted
- Private label needs
- Preferred shipping window
The final D-8316 lead time is written into the quotation.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request