Back-to-Wall Freestanding Bathtub, Flared Slim-Rim Acrylic, 67 in
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8072 is a double-ended back-to-wall bathtub in white gloss acrylic, made in one size: 1700 × 800 × 580 mm (67 × 31.5 × 22.8 in), SKU D-8072. Its walls flare out from a flat base that sits directly on the floor, the front corners are softly rounded, and a slim rim runs along the front and both ends while a raised flat edge meets the wall. With no tap holes in its slim rim, D-8072 is filled from a floor-standing or wall-mounted filler. A quote for D-8072 comes back within 12 business hours.
More back-to-wall options are in the SANIKB freestanding bathtubs collection.
More in Freestanding Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8072
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Profile & Rim
Flared walls, slim rim, straight wall edge
D-8072 has walls that flare outward from a flat base in a symmetric profile. A slim rim runs across the front and both ends, while the long side that meets the wall is a raised, straight flat edge with square back corners.
Drain at mid-length, 425 mm from the back
The drain sits 850 mm from the end, at mid-length, and 425 mm from the back edge. That places it just off the width centerline, because the back deck is wider than the front. The drawing gives a 12 mm rim lip.
Double-ended bowl, no tap holes
Both ends of the bowl are backrests, so either end can be used for reclining. The rim has no tap holes; water comes from a floor-standing or wall-mounted filler.
Back-to-wall layouts with deck taps or a plinth base are also in the freestanding bathtub range.
Fit & Footprint
One size: 1700 × 800 × 580 mm
D-8072 is made in a single size, 67 in long, 31.5 in wide and 22.8 in high, with inner depths of 460 mm and 470 mm.
- Overall Size
- 67" × 31.5" × 22.8" (1700 × 800 × 580 mm)
- SKU
- D-8072
- Installation
- Back to wall, flat to the floor
- Material
- Acrylic, white gloss
The tub sits directly on the floor with no plinth or feet. The straight back edge, with its square corners, is the side set against the wall; the rounded front corners face the room.
Take the drain rough-in from the approved drawing, since the outlet is not on the width centerline.
Construction & Finish
White gloss acrylic on a flat base
D-8072 is made from pure acrylic sheet in white gloss, shaped so the walls flare outward from a flat base.
White
One finish, one size
D-8072 is made in white gloss. Name it on the order so any later units match the first delivery.
Because the walls flare outward from the base, the outline at rim height is larger than the footprint on the floor. Take clearances to a vanity or door from the 1700 × 800 mm rim outline.
The slim lip is exposed on three sides, so protect the rim edges in packing and agree a damage reporting procedure before the tubs ship.
Keep a dated record of any damaged cartons at delivery for the claim.
Compliance
D-8072 compliance documents
D-8072 has a single SKU, D-8072, so documents are issued against that one reference.
Compliance documents for D-8072 are matched to your destination market. Ask for the document references and validity dates tied to D-8072 when you prepare submittals.
Include the destination market and your document list in the inquiry, and a written reply follows within 12 business hours.
Procurement
Ordering D-8072
Order under SKU D-8072. Quantities are confirmed in the quotation.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- Within 12 business hours
Planning several models for one project? List each model and quantity on a single inquiry; other SANIKB tubs are in the bathtub manufacturer range.
Include these details with the RFQ
- Quantity of D-8072
- Destination market and port
- D-8072 filler: floor-standing or wall-mounted
- Waste and overflow scope
- Carton marking
- Target shipping date
The D-8072 lead time shown is indicative; the quotation confirms it.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request