AG-322 and soft-touch premium grey are the specified finishes. Yalan Grey natural marble provides the named surface above the cabinet. The NB-3019 cabinet material is stainless steel. Its 1 configuration uses natural marble at the basin surface. Each complete factory model identifies a particular cabinet and mirror combination. The floating arrangement shown here leaves the floor visible beneath the unit.
The listed basin arrangement is a seamlessly joined basin. Its surface category is natural marble, distinct from the cabinet finish. For NB-3019-180, the remaining main-cabinet measures are 550 and 430, with the source unit printed as mm. The selected surface name appears in the component schedule below. Package contents and the supplied faucet or drain should be agreed in the quotation.
FORM & FINISH
The treatment combines soft-touch premium grey, AG-322. Finish selection is separate from the stainless-steel body specification. NB-3019-180 carries a first listed cabinet measure of 1800 mm. Use that model reference when comparing a finish sample with the photographed cabinet. A veneer or woodgrain label identifies the named treatment; it does not turn the cabinet specification into solid wood.
BASIN & COUNTERTOP
The listed basin arrangement is a seamlessly joined basin. Its surface category is natural marble, distinct from the cabinet finish. For NB-3019-180, the remaining main-cabinet measures are 550 and 430, with the source unit printed as mm. The selected surface name appears in the component schedule below. Package contents and the supplied faucet or drain should be agreed in the quotation.
MODEL CONFIGURATIONS
The configuration schedule contains 1 original model code: NB-3019-180 — first cabinet measure 1800 mm. The source explicitly lists two 800 by 800 mirrors for the 1800 model. Read the model-specific component rows before finalizing the cabinet arrangement.
COMPONENT PLANNING
The mirror for NB-3019-180 has the listed sequence 800 × 800 mm. The printed mirror quantity is 2. The dimension order follows the catalog rather than a newly assigned set of axes. The main cabinet in this configuration has 3 printed measures, so the mirror entry must be considered separately. Confirm installation requirements and the electrical specification where relevant to the chosen model.
CABINET DETAILS
The source illustration shows warm woodgrain across the cabinet front and two decorative mirrors. The open view reveals the same countertop and front arrangement from above. The alternative photograph helps review the front treatment and the arrangement of the basin surface. Decorative items shown in that view are styling references. Use the actual component specification to decide what is required for the project quotation.
Ag-322 + Soft-Touch Premium Grey Vanity Finish describes the specified appearance rather than a change to the cabinet body. NB-3019 retains the catalog's stainless-steel material designation. The mirror entry for NB-3019-180 starts at 800 mm. A coordinated finish choice should therefore consider the cabinet face and the separate mirror composition. Keep color codes and veneer descriptions on the finish schedule, and request the named treatment against the full model identity.
Yalan Grey Natural Marble Countertop is the named surface choice for NB-3019. This family has 1 printed model, and its reference cabinet sequence includes 550 as the second value. Surface selection must also account for the documented basin arrangement. A decorative-stone trade name does not establish an unprinted geological grade, while a slab label should not be silently rewritten as marble. Keep the material wording specific to the model when preparing the project quotation.
1800 Mm Cabinet And Mirror Coordination is a component-matching task, not a comparison of room-image scale. The first two mirror values are 800 and 800 mm. The component list separates the lower cabinet from the mirror assembly. The model count for NB-3019 is 1; use the selected code to find its own dimensional row. Cabinet changes can affect the upper composition, even when two pictures share a finish. Establish the final installation requirements with the complete cabinet and mirror specification.
