Wide 420 mm Seat Skirted Compact One-Piece Toilet, Dual-Flush

Thirty pieces opens a production order for 2169, a wide 420 mm seat skirted one-piece toilet dual flush model built in our own Foshan factory.

Hotel and multifamily buyers tend to fix one fixture for every guest room, and a wide seat is an easy comfort argument to put on the specification. The 420 mm toilet seat width sets 2169 apart from slimmer skirted one piece toilets in the same range.

Typical lead time is 30–45 days, confirmed on the quotation for your quantity. Send one model code per room type and we quote the whole schedule in a single reply.

Overall Size

28.7" × 16.5" × 29.5" (730 × 420 × 750 mm)

Seat Width

420 mm

Material

Vitreous china ceramic

Mounting

Floor-mounted

Finish

Glossy white

Outlet

S trap, 12 inch rough-in

Flush

Siphonic dual flush, side or top button

Certification

cUPC

Seat width is the figure to place on the plan first. Compared with narrow skirted toilets, a 420 mm seat needs more side room, so check the gap to the vanity and to the wall before cabinets are ordered.

Compare the 750 mm height with the standard height your project specifies for cisterns, shelves and wall niches. The drawing prints an S-trap rough-in of 305 mm. A two piece toilet needs its tank checked separately; on this one piece model the 750 mm covers the whole body.

The model spec sheet goes out with each quotation and can be pasted straight into a tender schedule.

Other skirted toilets and one piece toilets sit in our one-piece toilet collection.

Start with the narrowest bathroom in the project. If the 420 mm seat clears the vanity and the wall there, it clears everywhere else, and this one piece model covers every room type under one code.

A skirted new toilet also changes how the floor reads in a mock-up room. The base is closed at the sides, so the fixture presents one clean outline when the sample room goes to the owner for approval, and nothing behind the pan draws the eye.

Ask the installer to set the 12 inch rough-in from the finished wall, not from the stud. Our drawing gives the S-trap position, and the sheet can go to site with the purchase order.

MOQ

30 pcs

Standard Lead Time

30–45 days (typical)

2169 holds cUPC certification. Ask for the current certificate copy with the quote so the file matches your destination market.

Private label, custom carton artwork and your own barcode run through the OEM/ODM service at the same minimum.

A complete enquiry lists quantity, destination port, flush button position and the documents your project file needs. Replies arrive within 12 business hours.