Siphon Jet One-Piece Toilet with 3-Inch Flush Valve, 14.4-Inch Body Width

Model 1009 is a floor-mounted one-piece toilet cast in vitreous china with a glossy white glaze and an S-trap outlet. The flush is siphonic with a jet flush port, run through a 3 in flush valve at a standard single flush of 1.28 gpf (4.8 L). The trapway is fully glazed and a soft-close seat is supplied with the fixture.

Published details for this reference:

• Model: 1009
• Type: One-piece toilet, floor-mounted
• Material: Vitreous china
• Finish: Glossy white
• Flush: Siphonic, jet flush port
• Flush valve: 3 in
• Flush volume: Single flush 1.28 gpf (4.8 L) standard; 1.06 / 1.28 gpf dual flush on request
• Trapway: Fully glazed
• Seat: Soft-close, supplied with the fixture
• Rough-in: S-trap, 305 mm (12 in)
• Ceramic rim height: 420 mm (16.5 in), seat not included
• Overall size: 27.0" x 14.4" x 28.5" (685 x 365 x 725 mm)
• MOQ: 50 pcs, mixed 1 x 20 ft container accepted
• Marking: cUPC

The published dimension set is 685 mm front to back, 365 mm across and 725 mm high, or 27.0 by 14.4 by 28.5 inches. Rough-in is 305 mm (12 in) from the finished wall to the outlet centre.

Ceramic rim height is published as 420 mm (16.5 in) and is measured to the china rim, so the seat is not included in that figure. Take the finished height and the clear floor area from the approved drawing, and check the 365 mm body width against vanities, stall partitions and door swings before the layout is signed off.

The standard configuration is a single flush at 1.28 gpf (4.8 L) through a 3 in flush valve, with a siphonic flush and a jet flush port. This is the build the model is listed and filtered under, so a shortlist drawn from the Single Flush filter returns 1009 as supplied.

A 1.06 / 1.28 gpf dual flush build is available on request.

The body is one-piece vitreous china in a glossy white glaze, with a fully glazed trapway. A soft-close seat is supplied with the fixture.

For a multi-unit programme, hold one glaze tone across the order and agree the packing arrangement for the seat before the first container. Agree a damage reporting window with photographs at the same time, so units broken in transit are handled against an existing rule.

1009 is cUPC listed. The published specification also holds material, type, mount, finish, size and MOQ. Before it goes into a submittal, request the current listing number and certificate validity so the documentation matches your destination market, and ask for paperwork against model 1009 by name.

Published minimum order quantity is 50 pieces and a mixed 1 x 20 ft container is accepted, which lets this reference ship alongside other models. Standard lead time is 30 to 45 days after deposit, indicative until the quotation is issued. Enquiries are answered within 12 business hours, and private label work runs through the SANIKB OEM and ODM program.