-

Upswept Single Hole Bathroom Faucet with Tall Vessel Option B029 01/02
B029 01/02 -

Taper Blade Gun Metal Grey Wall Mount Bathroom Faucet B029 28
B029 28 -


Taper Blade Concealed Shower System with Handheld Only SP029A 21
SP029A 21 -


Taper Blade Concealed Shower System with Rain Head & Handheld SP029A 22
SP029A 22
Taper Blade, four codes
A gunmetal faucet family built on one faceted taper
Taper Blade is a compact gunmetal faucet series: a faceted body that narrows toward its base, a thin angular blade spout and a flat blade lever, all finished in Gun Metal Grey over brass. Four model codes cover the basin and the shower, so one finish name runs through the whole bathroom schedule.
Code, fixture, outlet
Matching each Taper Blade bathroom faucet and shower code to the fixture point
The four codes split cleanly by where they install. The basin pair begins with B029, the shower pair with SP029A, and the last two digits separate the variants.
Swipe to compare all specifications
| Model | Type | Mount | Outlets or height | MOQ | |
|---|---|---|---|---|---|
Deck basin | B029 01/02 | Single-hole bathroom faucet | Deck-mounted, single hole | Standard or Tall Vessel | 100 pcs |
Wall basin | B029 28 | Wall-mount bathroom faucet | Wall-mounted | Spout on rectangular plate | 100 pcs |
Shower, one outlet | SP029A 21 | Concealed shower system | Wall-mounted, in-wall valve | Handheld | 100 pcs |
Shower, two outlets | SP029A 22 | Concealed shower system | Wall-mounted, in-wall valve | Rain Head and Handheld | 100 pcs |
Every code is brass, finished in Gun Metal Grey and tagged cUPC, so the differences that matter for a quote are mount type, outlet count and, for B029 01/02, which height you need.
Basin side of the series
Choosing a bathroom faucet for the basin: deck or wall mount
Two codes in series 129 serve the vanity, and they answer different basin layouts.
B029 01/02 is the deck-mounted option. It is a single-hole bathroom faucet, so the counter or basin needs one tap hole. The tall vessel version is offered for a bowl that sits above the countertop.
B029 28 is the wall-mounted bathroom faucet on a rectangular plate. The spout comes from the wall, which keeps the faucet off the deck. Wall supply lines must be planned before the wall is closed, so confirm it early.
Both basin faucets share the faceted taper, the blade spout and the flat blade lever. In a mixed project, a hotel can fit the wall version in the guest bathroom and the deck version in a powder room, all in the same finish.
Before choosing between the two, check the basin you intend to pair with the faucet. Send the basin model with your inquiry so the faucet height can be checked against it.
Height and outlet decisions
Three choices that change the order lines
Inside a single finish, buyers still make three calls that alter the bill of materials.
Basin height. B029 01/02 is one design offered in a standard height and a tall vessel height. Match the height to the basin on your drawings and split the quantity by height on the RFQ rather than ordering one code and sorting it later.
Deck or wall. B029 28 moves the basin faucet onto the wall with a rectangular plate, which keeps the faucet off the counter. Confirm the choice before tiling drawings are released.
Shower outlets. SP029A 21 is a handheld-only concealed set; SP029A 22 adds a square rain head to the handheld. Both use an in-wall valve, so the rough-in stage and the trim order should reference the same code.
Before the walls close
Planning the bathroom sink and shower rough-in around series 129
The wall-mounted pieces in this series put more decisions on the build schedule than the deck faucet does.
Start with the basin. Fix the bathroom sink position and the faucet type together, because a wall-mounted spout and a deck single-hole faucet need different supply points.
Next, set the shower valve. Both SP029A sets use an in-wall valve, so the valve body goes in during rough-in and the trim follows at finishing. Keep the rough-in drawing and the trim order on the same code.
Then decide the outlet count per room type: SP029A 21 gives a handheld only, while SP029A 22 adds the rain head to the handheld.
Finally, group the order by finish. Everything in this series is Gun Metal Grey, so the whole schedule can be written against one finish name.
Quoting a gun metal set
Turning a room schedule into a series 129 quote
Distributors, contractors and project buyers get the fastest written reply when the inquiry maps straight onto the model codes.
List quantity per code
Give a count for B029 01/02, B029 28, SP029A 21 and SP029A 22 separately; MOQ is 100 pcs per model.
Split the basin heights
For B029 01/02, state how many standard and how many tall vessel units you need.
Name the shower layout
Say which rooms take handheld-only and which take rain head plus handheld, so valve and trim quantities line up.
Add destination and timing
Include the delivery country, target ship date and whether the job is wholesale stock, hotel or a project build.
Flag private label needs
Packaging or branding requests go through our OEM/ODM service page at /pages/oem-odm-service.
Where Gun Metal Grey lands
Who specifies a gunmetal bathroom faucet series
The series spans basin and shower, so one Gun Metal Grey finish can run through the whole room.
Hotel and serviced apartment fit-outs
Standard rooms can pair B029 01/02 with SP029A 21, while suites step up to SP029A 22 with the rain head, all in one finish.
Bathroom showroom distributors
Four codes is a small stocking commitment that still shows a complete gun metal bathroom on display.
Residential builders and remodelers
The wall-mount B029 28 and the concealed showers suit plans that put the basin faucet and shower controls on the wall.
Pricing is quoted per order against each model's MOQ, and written replies come within 12 business hours.










