Square Arch Faucet Collection (125)

Square Arch bends a round brushed gold tube into a squared arch spout and pairs it with pin levers on round hubs with matte black faces. The series covers single-hole (standard and tall vessel heights) and widespread basin faucets, a two-piece wall-mount basin set, single-control and diverter shower valve trim kits, a freestanding tub faucet with handheld and a wall-mount tub filler, all cUPC listed. SANIKB supplies it for wholesale, hotel and project orders, with OEM/ODM available.

Service
OEM / ODM · free mold from 300 pcs
MOQ
20 ft / 40 ft containersBelow 1 container: your own China forwarder required.
Lead time
30–45 days after sample
7 products

Squared tube, black hubs

Which Square Arch Brushed Gold Bathroom Faucet Goes Where

Series 125 is built around one gesture: a round brushed gold tube bent into a squared arch, with pin levers set on round hubs that carry matte black faces. Seven models span the vanity, the shower and the tub. Start by matching the brushed gold bathroom faucet or bath piece to the fixture it serves.

Brushed gold single hole bathroom faucet with right-angle hook neck spout, side lever on black hub — SANIKB B1016 01 43 2Single basin, one holeB1016 01/02 comes in standard and tall vessel heights under one model family, so state the height split per room type on the order.Brushed gold widespread bathroom faucet with squared inverted-U tube spout and two short pin lever handles — SANIKB B1016 04 43 1Three-hole vanityB1016 04 is the deck-mounted widespread version for counters drilled with three holes.Brushed gold two-piece wall mount faucet with curved tube spout and black-face round valve with pin lever — SANIKB B1016 28 43 1Spout out of the wallB1016 28 is a two-piece wall-mount basin set, with the spout coming from the wall instead of the deck.Brushed gold wall mount tub filler on square plates with black-accent valves and handheld — SANIKB SO1016F 22 43 1-1Tub against a wallSO1016F 22 mounts on the wall and pairs a tub spout with a handheld.Brushed gold freestanding tub faucet with squared arch tube spout, black-faced hub pin lever and handheld — SANIKB SF1016 12 43 2Tub in open floorSF1016 12 is floor-mounted, again with tub spout and handheld outlets.

The two shower valve trim kits complete the room; they are covered in the table below.

Constant across 125

Shared Terms and the One Split Spec

Finish, certification and MOQ hold for every model; body metal is the one value that splits.

Finish
Brushed Gold, all 7 models
Certification
cUPC listed, all 7 models
MOQ
100 pcs per model
Body metal
Brass on 5 models, stainless steel on 2
Series design
Squared arch tube spout; pin levers on round hubs with matte black faces
Series / set tag
125

Mount first, metal second

Seven Models, Mount and Body Metal Compared

Body metal is the one spec that is not uniform here. The single-hole basin faucet and the freestanding tub faucet are stainless steel; the other five are brass. Note it in purchase specs if your account standardizes on one metal.

SANIKB SF1016 12 Freestanding Tub Faucet product photo

Swipe to compare all specifications

ModelTypeMountOutletsBodyMOQ
Hook Neck Single Hole Bathroom Faucet with Tall Vessel Option B1016 01/02B1016 01/02Single-hole bathroom faucetDeck-mounted, single holeStandard / Tall Vessel heightsStainless Steel100 pcs
Brushed Gold Square Arch Widespread Bathroom Faucet B1016 04B1016 04Widespread bathroom faucetDeck-mounted, three holesBasin spoutBrass100 pcs
Black-Face Valve Brushed Gold Wall Mount Bathroom Faucet B1016 28B1016 28Wall-mount bathroom faucetWall-mountedBasin spoutBrass100 pcs
Square Arch Brushed Gold Shower Valve Trim Kit SP1016 21SP1016 21Shower valve trim kitWall-mounted trim, in-wall valveSingle controlBrass100 pcs
Square Arch Brushed Gold Diverter Shower Valve Trim Kit SP1016 22SP1016 22Shower valve trim kitWall-mounted trim, in-wall valveDiverterBrass100 pcs
Square Arch Brushed Gold Wall Mount Tub Filler SO1016F 22SO1016F 22Wall-mount tub fillerWall-mountedTub Spout + HandheldBrass100 pcs
Brushed Gold Square Arch Freestanding Tub Faucet SF1016 12SF1016 12Freestanding tub faucetFloor-mountedTub Spout + HandheldStainless Steel100 pcs

Four of the seven are wall-mounted: the wall-mount basin set, both valve trims and the wall tub filler, and the two trims list an in-wall valve. The freestanding tub faucet is floor-mounted instead.

Vanity decisions

Picking a bathroom faucet by sink drilling: single hole, widespread or wall

Three of the seven models serve the basin, and the sink drilling usually decides which one fits.

B1016 01/02 is for a basin with one tap hole. It comes in standard and tall vessel heights, so the same design works on a counter basin or a bowl that sits above the deck.

B1016 04 is the widespread bathroom faucet. It is deck-mounted across three holes, so the counter must be drilled for it. Do not specify it for a one-hole basin.

B1016 28 is the wall-mount bathroom faucet set. It is a two-piece set with the spout coming from the wall, which suits a vanity where the deck should stay clear.

Basin faucets are usually bought for the whole project, not one room. Match each vanity in the drawings to one of these three, then total the quantity per model before sending the inquiry.

If the bathroom sink is still undecided, send us the basin model or the drilling plan and we can say which of the three layouts fits it.

Accounts that spec Square Arch

Who Orders This Series

Hotel and hospitality projects

One brushed gold look across basin, shower and tub keeps guest rooms consistent, and a single series tag simplifies the room schedule.

Distributors and showrooms

Seven models cover the common bathroom positions, so a dealer can stock one display wall and quote a full room from it.

Contractors and developers

Mount types are spelled out per model, so the plumbing schedule can be sorted by deck, wall and floor positions for each unit type.

Private label buyers

Branding, packaging and spec changes run through our OEM/ODM program at /pages/oem-odm-service.

Quoting series 125

How to Request a Quote for the Set

  1. List positions per room type

    Count basins, showers and tubs in each layout, then assign a model to each position from the table above.

  2. Settle the open choices

    For B1016 01/02 state standard or tall vessel height; for showers state single control (SP1016 21) or diverter (SP1016 22).

  3. Give quantities against MOQ

    Each model carries a 100 pcs MOQ; give the count per model and any staged delivery you need.

  4. Flag OEM or labeling needs

    Mention private label, carton marking or document requirements up front so they are priced into the quote.

  5. Send and get a written reply

    Pricing is quoted per order. Our team replies in writing within 12 business hours.

Shower and tub positions

Planning the shower valve trim and tub filler beside the bathroom faucets

The basin faucets get most attention, but the valve and tub models need the earlier plumbing decisions.

The two shower trims, SP1016 21 and SP1016 22, are trim kits for an in-wall valve. The valve goes in during rough-in, so settle single control or diverter before the wall is closed.

For the tub, the choice is wall or floor. SO1016F 22 is the wall-mounted tub filler for a tub against a wall, and SF1016 12 is the freestanding tub faucet for a tub standing in open floor. Both pair a tub spout with a handheld.

Body metal can matter on a specification sheet. The single-hole basin faucet and the freestanding tub faucet are stainless steel, while the other five are brass. Raise this in the RFQ if your account standardizes on one metal.

Sorting the schedule by position, basin, shower and tub, makes it easy to see which room types need which codes.