Flat Ribbon Faucet Collection (106)

Flat Ribbon pairs brushed gold round bodies with a thin flat rectangular spout and flat levers, carried onto rectangular shower plates. The brass series includes single-hole (standard and tall vessel heights) and widespread basin faucets, a two-piece wall-mount basin set, single-lever and diverter shower valve trim kits and a concealed shower set with flat rectangular rain head and handheld, all cUPC listed. SANIKB supplies it for wholesale, hotel and project orders, with OEM/ODM available.

Service
OEM / ODM · free mold from 300 pcs
MOQ
20 ft / 40 ft containersBelow 1 container: your own China forwarder required.
Lead time
30–45 days after sample
6 products

Round body, ribbon spout

Six Flat Ribbon codes, one brushed gold finish

Series 106 is a compact brushed gold bathroom faucet and shower family in brass. Each code pairs a round body with a thin, flat rectangular spout or flat lever, and the shower pieces carry the same lines onto rectangular plates. The table sets the six models side by side so a buyer can see at once where each one mounts.

Swipe to compare all specifications

ModelFixtureMountingMaterialMOQ
Single holeB1003 01/02Single-hole bathroom faucet, standard or tall vesselDeck-mounted, single holeBrass100 pcs
WidespreadB1003 04Widespread bathroom faucetDeck-mounted, three holesBrass100 pcs
Wall basinB1003 28Wall-mount bathroom faucetWall-mountedBrass100 pcs
Single-lever trimSP1003C 21Shower valve trim kitWall-mounted trim, in-wall valveBrass100 pcs
Diverter trimSP1003C 22 43 1Shower valve trim kit with diverterWall-mounted trim, in-wall valveBrass100 pcs
Concealed setSP1003C 22 43 1-1Concealed shower system, rain head and handheldWall-mounted, in-wall valveBrass100 pcs

All six are cUPC listed, share the Brushed Gold finish and the same 100 pcs MOQ, which keeps a mixed order simple to plan.

Pick by where it installs

Matching each Flat Ribbon code to the fixture it serves

Three codes serve the basin and three serve the shower. Decide the fixture first; the code follows.

Brushed gold single hole bathroom faucet with flat rectangular spout, forward flat lever and round base — SANIKB B1003 01 43 1One deck hole, two heightsB1003 01/02 is the single-hole basin faucet. One code covers both a standard body and a tall vessel body, so a schedule with undermount and vessel basins can stay on the same model; list the quantity for each height separately.Brushed gold widespread bathroom faucet with flat ribbon spout on round column and two flat lever handles — SANIKB B1003 04 43 1Three-hole vanity topsB1003 04 is the widespread version, deck-mounted through three holes.Brushed gold wall mount bathroom faucet with flat rectangular spout and flat lever — SANIKB B1003 28 43 1Spout from the wallB1003 28 is the two-piece wall-mount basin set; the spout and lever mount on the wall instead of the deck.Brushed gold rectangular shower valve trim plate with single lever, shown with rough-in valve body — SANIKB SP1003C 21 43 1Single shower outletSP1003C 21 is the single-lever trim kit on a rectangular plate, matched to an in-wall valve.Brushed gold rectangular shower valve trim with lever and diverter knob above, shown with rough-in body — SANIKB SP1003C 22 43 1Switching between outletsSP1003C 22 43 1 is the trim kit with a diverter, on the same in-wall valve mounting as the single-lever kit.Brushed gold concealed shower with flat rectangular rain head, rectangular valve plate and stick handheld — SANIKB SP1003C 22 43 1-1Complete shower in one codeSP1003C 22 43 1-1 bundles the concealed valve trim with a flat rectangular rain head and a handheld under one model code.

Basin planning

Specifying a brushed gold bathroom faucet for a commercial bathroom sink

Start at the bathroom sink, because the sink decides the faucet. Series 106 offers three kinds of bathroom sink faucets: a single-hole model for one-hole decks, a widespread model for tops drilled in three places, and a two-piece wall-mount set for basins where the spout leaves the wall instead of the counter.

B1003 01/02 comes in standard and tall vessel heights. On a hotel floor with both undermount and vessel basins, the same flat ribbon bathroom faucet can serve each room, but the spout height should be checked against the basin rim on the drawings before the split is written into the order.

For B1003 04, confirm the vanity top is drilled for three holes before the tops are fabricated, and put the drilling note on the fabricator's schedule. A miscut top is hard to correct once it is installed.

B1003 28 needs its supply positions planned in the wall before tile goes up. Coordinate the height with the basin supplier so the thin flat spout lands over the bowl and not the rim.

Shower side

Pairing the shower trim with the basin faucets

The three shower codes all use rectangular plates and the same brushed gold finish. SP1003C 21 and SP1003C 22 43 1 are trim kits, so each needs an in-wall valve behind the wall; the concealed set SP1003C 22 43 1-1 adds a flat rectangular rain head with a handheld.

A single-lever trim suits a standard shower with one outlet. The diverter trim fits a shower where the guest switches between outlets. Choose by room type, then repeat the choice across every matching room so the schedule stays short.

Decide the shower code before the valves are bought, and tell the plumber which trim each room receives.

Before you approve

Checks on the final product list for a Flat Ribbon order

Before the final product list is signed off, read it against the table above: one model code per position, a quantity per code, and the standard or tall vessel split written out for B1003 01/02.

Ask for the cUPC listing details if the project submittal requires them, and say whether the design needs private-label marking. Matching spout shape, lever shape and finish across basin and shower pieces is the point of a series, so avoid mixing in codes from other series in the same room.

Why order the set together

Keeping brushed gold consistent across a project

Gold tones are where mixed sourcing shows first: a brushed gold bathroom faucet from one line and a shower trim from another can look a shade apart side by side. Ordering the basin and shower pieces of series 106 together keeps them on one finish, Brushed Gold, and one brass construction.

The design detail also stays aligned. The thin flat spout on the basin faucets and the flat levers on the rectangular shower plates belong to one family, so a guest room, a model unit or a showroom bay reads as a single specification rather than a collection of near matches.

For a project that mixes vessel and undermount basins, the single-hole code comes in standard and tall vessel heights, and the shower can be split between the single-lever trim, the diverter trim and the concealed set by room type.

What to put in the RFQ

Requesting a quote for Flat Ribbon brushed gold faucets

  1. List codes and quantities

    Name each model, for example B1003 04 or SP1003C 21, with a quantity per code. Each model has a 100 pcs MOQ.

  2. Split the single-hole heights

    For B1003 01/02, state how many standard and how many tall vessel units you need.

  3. Describe the shower layout

    Say whether each shower takes the single-lever trim, the diverter trim or the full concealed set with rain head and handheld.

  4. Note branding or packaging needs

    Private label, custom packaging or changes to the design go through our OEM/ODM service at /pages/oem-odm-service.

  5. Give the delivery market

    Tell us the destination and project timing. Pricing is quoted per order, and a written reply comes within 12 business hours.

Who buys series 106

Trade buyers this series is built for

Hotel and hospitality projects

A full room package, from basin faucet to concealed shower, under one finish and one series number.

Distributors and showrooms

Six codes are enough to cover deck, wall and shower requests without carrying a long catalog of variants.

Contractors and developers

Clear mounting types per code make it easy to coordinate rough-in work with the trades on site.

Private-label brands

The brass bodies and flat ribbon profile can be supplied under your own brand through OEM/ODM.