Thin spout, flat lever
A matte black bathroom faucet series drawn with straight lines
Series 105, sold as Flat Blade, is a small matte black bathroom faucet family for buyers who want the basin and the shower to read as one design. Every piece uses a thin rectangular spout or a flat lever, so the geometry stays consistent from vanity to shower wall.
The line is built in stainless steel and finished matte black on all four models. Two serve the basin and two serve the shower, so a basin faucet and a shower trim can be ordered under one finish code and one series number.
Because the range is short, the real choice is not style but mounting: a deck faucet, a wall faucet, a single-lever trim or a diverter trim. The sections below are organized around that choice.
Choose by install point
Choosing the Flat Blade code for each room
Start with the fixture you are fitting, then confirm the model code below.
Deck basin, two heightsB1018 01/02 mounts through one deck hole. The code covers a standard body and a tall vessel body, so state the split on each order line.
Wall basin, clear deckB1018 28 is the two-piece wall-mount set, the basin option that keeps the faucet off the countertop.
Shower, single leverSP1018 21 is the single-lever trim kit on a rectangular plate, for an in-wall valve.
Shower with a diverterSP1018 22 adds a diverter on the rectangular plate, again for an in-wall valve.Basin planning
Planning a matte black bathroom faucet for the vanity wall
The basin side of Flat Blade is short, which makes planning easy. A deck faucet, B1018 01/02, serves counters with one hole, and a wall faucet, B1018 28, serves basins where the counter should stay clear. Both are stainless steel in matte black.
On the deck model, the choice that matters is height. Standard and tall vessel bodies share one code, so a project with undermount basins in some rooms and vessel basins in others can use one bathroom sink faucet family. Measure the basin rim on the drawings first and pick the height that lets water land inside the bowl.
On the wall model, the spout and lever mount on the wall, so the supply positions need to be set before the wall is closed. Agree on the finished height with whoever supplies the basin, because the thin blade spout looks best centered over the bowl.
When bathroom sink faucets are ordered for a whole building, write the deck and wall counts on separate lines, since the two mount in different ways.
Shower side
Matching the shower trim to the matte black basin faucet
Both shower codes, SP1018 21 and SP1018 22, are trim kits on rectangular plates and need an in-wall valve behind the tile. The single-lever kit gives one outlet; the diverter kit adds the ability to switch outlets.
Because the basin faucet and shower trim share a blade profile and one finish, a hotel can specify a single matte black line for the whole bathroom. State which rooms take the diverter so the valve rough-in matches the trim.
Before you approve
Checks before the final product list goes out
Check the final product list for one code per position and a stated height split on B1018 01/02. Confirm whether the project needs cUPC listing details for submittals, and note any packaging or marking requests for OEM/ODM work.
Series 105 has four codes, so a bathroom faucet order here is mostly a matter of matching mount types and shower trims to rooms.
Four codes in one grid
Two basin routes, two shower plates
The table lists each model's factory code, mounting method and order minimum as it appears in the specifications.
Swipe to compare all specifications
| Model | Type | Mount | Material | MOQ | |
|---|---|---|---|---|---|
 Standard or tall vessel | B1018 01/02 | Single-hole bathroom faucet | Deck-mounted, single hole | Stainless Steel | 100 pcs |
 Two-piece set | B1018 28 | Wall-mount bathroom faucet | Wall-mounted | Stainless Steel | 100 pcs |
 Single lever | SP1018 21 | Shower valve trim kit | Wall-mounted trim, in-wall valve | Stainless Steel | 100 pcs |
 Diverter | SP1018 22 | Shower valve trim kit | Wall-mounted trim, in-wall valve | Stainless Steel | 100 pcs |
Three of the four models mount on the wall; only B1018 01/02 sits on the deck.
Accounts that spec black blade trim
Who orders a matte black faucet package like this
Hotel and serviced apartment fit-outs
One basin code plus one shower trim code per room type keeps the procurement schedule short.
Contractors on multi-unit housing
The diverter and single-lever trims both sit on a rectangular plate, so units ordered with either trim keep the same plate shape.
Distributors and showrooms
Four models cover a complete matte black display bay in one finish, without stocking a long catalog.
Private label brands
Packaging and marking for a branded blade-style line are handled through our OEM/ODM service at /pages/oem-odm-service.
Sending a 105 inquiry
What a complete Flat Blade RFQ contains
Codes and quantities
List B1018 01/02, B1018 28, SP1018 21 and SP1018 22 with a quantity for each. The MOQ is 100 pcs per model.
Basin height split
For B1018 01/02, give separate counts for standard and tall vessel bodies so each height is quoted and packed separately.
Project stage and delivery
Both shower trims are for an in-wall valve. Tell us the project stage and target delivery date for the trims and the wall-mount set.
Branding and documents
Note any private label, carton or marking requests, and whether you need the cUPC listing details for your submittal.
Written quote
Pricing is quoted per order. You will receive a written reply within 12 business hours covering models, MOQ and any OEM points.
Series 105 at a glance
Flat Blade shared specifications
- Series
- 105 (Flat Blade)
- Models
- 4: deck basin, wall basin, shower trim, diverter shower trim
- Material
- Stainless steel on every model
- Finish
- Matte black
- Certification
- cUPC on all four
- Mounting
- 1 deck-mounted, 3 wall-mounted
- MOQ
- 100 pcs per model