Concrete Wall Mount Sink Supplier

Concrete wall-mount sinks are space-saving, wall-hung basins cast in concrete, suited to compact bathrooms, powder rooms and contemporary fit-outs where floor space is tight. This range pairs wall-hung and above-counter vessel pieces, mostly in rectangular profiles, across terracotta, pink, grey and white cast finishes, and sits within the broader concrete sink program. Custom sizes, colours and tap-hole drilling available on request.

Service
OEM / ODM · free mold from 300 pcs
MOQ
20 ft / 40 ft containersBelow 1 container: your own China forwarder required.
Lead time
30–45 days after sample
4 products

Mount type sorts this range

Concrete wall mount sink models compared

This concrete wall mount sink range is small and easy to read: four cast concrete models, three hung on the wall and one that sits on a counter. The table puts mount, profile, cast finish and size for each in one place.

SANIKB C1004 Wall-Mount Concrete Sink product photo
MountProfileCast finishSize (spec sheet)MOQ
C1002Wall-mountedRectangularTerracotta530 × 280 × 180 mm20 pcs
C1001Wall-mountedFluted half-moonPink465 × 360 × 120 mm20 pcs
C1004Wall-mountedRectangular, ribbed frontWhite450 × 320 × 380 mm20 pcs
C1003Above-counter (vessel)Rectangular rampGrey800 × 450 × 140 mm or 600 × 450 × 140 mm20 pcs

Every model carries the same 20 pcs MOQ, so a mixed opening order can combine wall-hung and vessel pieces without one model forcing a larger run.

Cast basins in four figures

The wall-hung trio by the numbers

Leave the ramp vessel aside and the three wall-hung bodies still differ more than their shared mount suggests.

SANIKB C1004 Wall-Mount Concrete Sink product photo
Concrete Wall Mount Sink with Ribbed Front C1004 — SANIKB
3 of 4
models are wall-mounted; C1003 is the only vessel basin
450–530 mm
first listed dimension of the wall-hung models, C1004 up to C1002
120–380 mm
span of the third listed dimension, from the fluted C1001 to the ribbed C1004
4
cast finishes shown: Terracotta, Pink, Grey and White

The third figure on each spec sheet separates these bodies most: 120 mm for the half-moon C1001, 180 mm for the rectangular C1002 and 380 mm for the ribbed-front C1004. Check each drawing for how those figures map to the installed body.

Pick by profile, not by catalog order

Which concrete floating sink fits the brief

With only four models, the shortlist usually comes down to the look the designer has already drawn. Match the profile first, then confirm the finish.

Fluted Half-Moon Concrete Floating Sink C1001, wall-mounted — SANIKBCurved and flutedThe only half-moon outline in the group, with a fluted body in Pink. Its spec sheet lists 465 × 360 × 120 mm, the smallest third figure of the three wall-hung pieces.Concrete Floating Vanity Sink C1002, wall-mounted — SANIKBClean rectangleA rectangular wall-mount body in Terracotta, listed at 530 × 280 × 180 mm. Its 530 mm first figure is the largest among the wall-hung models, and it is sold as the floating vanity sink.Concrete Wall Mount Sink with Ribbed Front C1004 — SANIKBSculptural blockA rectangular White body with a ribbed front, listed at 450 × 320 × 380 mm. It is the only wall-hung model in White and the only one with a ribbed front.Concrete Ramp Vanity Sink C1003 — SANIKBCounter alternativeWhen a project mixes floating basins with countertop stations, the Grey ramp vessel comes in two sizes, 800 × 450 × 140 mm and 600 × 450 × 140 mm.

Accounts that order cast basins

Who buys concrete wall sinks from us

Three account types and how each can use a four-model concrete line.

Design-focused distributors

Stock one or two profiles as showroom pieces, then quote custom finishes against project inquiries. The shared 20 pcs MOQ keeps a mixed starter order manageable.

Hospitality fit-out contractors

Repeat one model across a multi-unit schedule. Confirm the cast finish in writing before the full run, since concrete color is part of the design intent.

Private-label brands

Add a concrete line beside ceramic or stone ranges. Custom sizes, colors and tap-hole drilling can be discussed through our OEM/ODM service page.

Briefing a cast concrete order

What to include in your RFQ

List the points below for each line, whether the order uses standard or custom pieces.

  1. Model and mount

    List the model codes (C1001, C1002, C1003, C1004) and confirm wall-hung or vessel for each line, since C1003 is the only counter-mounted piece.

  2. Size option

    For C1003, state whether you need the 800 × 450 × 140 mm or 600 × 450 × 140 mm size. For any other change to dimensions, send a sketch with the target size.

  3. Finish and tap holes

    Name the cast finish per line, or a reference sample if you want a custom color, and say whether you need tap-hole drilling and where.

  4. Quantity and destination

    Give quantities per model against the 20 pcs MOQ, plus the delivery port and any private-label packaging needs. Pricing is quoted per order, and we reply in writing within 12 business hours.

Frequently Asked Questions

Do you support OEM concrete wall mount sink production?

Yes. SANIKB supports OEM/ODM concrete wall mount sink production for distributors, importers, bathroom brands, contractors, and project buyers. Custom size, color, finish, basin shape, packaging, and private-label options can be reviewed based on your order requirements.

Can I customize the size and finish?

Yes. Custom dimensions, concrete colors, surface textures, and finish directions can be discussed. Sample approval is recommended before confirming bulk production.

What is the MOQ?

MOQ depends on the model, customization level, color, packaging, and order quantity. Please contact SANIKB with your target model, estimated quantity, and customization requirements to confirm MOQ.

Do you provide installation documents?

Yes. Specification sheets, CAD files, and installation guides can be prepared based on the confirmed model and project requirements.

Can you provide samples?

Yes. Samples can be requested for product review, showroom display, project approval, or private-label development. Sample availability depends on the selected design, finish, and production schedule.

How do you package concrete sinks for export?

Concrete sinks are packed with protective materials to reduce damage during international shipment. Packaging can be adjusted for bulk orders, pallet loading, and private-label requirements.

Request a Concrete Wall Mount Sink Quote

Looking for a factory-direct concrete wall mount sink supplier for bulk orders, commercial projects, or private-label development? Send SANIKB your product size, finish requirement, order quantity, packaging needs, and target market to receive a custom quotation.