Triangular Tap Deck Countertop Basin
The triangular tap deck countertop basin brings a drilled ceramic platform to the narrow end of a three-sided body. D560’s outline combines a broad front edge with two sides narrowing towards the rear, joined by softened corners. A small platform occupies that rear section and carries one tap hole. A round overflow is visible in the inner wall beneath it, separate from the central floor drain. The white ceramic body measures 560 × 345 × 130 mm overall and is listed for above-counter mounting. Its triangular plan describes the body shape without specifying equal angles or corner installation. The rear platform and widening bowl define the arrangement within this outline.
Shape & size
Shape and size of D560
Three main sides with softened corners
A broad front opposite the narrow rear section
Two sides converge towards the rear platform from the broad front edge. The top plan defines a triangular body without stating equal side lengths or angles.
One tap position at the narrow end
A drilled platform inside the triangular perimeter
The rear ceramic platform carries one tap hole. It occupies the narrow section rather than extending across the broad front of the bowl.
Round overflow and floor drain
Separate inner openings beneath the tap platform
The photograph shows a round overflow in the inner rear wall. A central floor drain is distinct from that opening and the single deck hole.
560 × 345 × 130 mm overall
The full envelope of the above-counter D560 body
The source identifies above-counter mounting. The three measurements describe overall exterior dimensions, without internal depth, tap-hole spacing or corner mounting specifications.
D560
560 × 345 × 130 mm
D560 triangular body with a rear tap platform
- D560 — 560 × 345 × 130 mm
- Required quantity