Swept Rectangular Basin with Projecting Tap Support
A small ceramic support extends behind D376’s main rear edge to carry the tap opening. This swept rectangular basin with projecting tap support keeps that rear projection separate from the broad washing bowl. Its short inner ends turn upward, while a thin open front edge follows the long curved face. The factory plan shows one floor opening in the middle of the continuous cavity and one tap hole within the rectangular rear support. There is no full-width tap deck or separate overflow shown. D376 measures 580 × 405 × 150 mm overall in white ceramic, with above-counter installation stated. The rising bowl faces define its form without turning the rear support into a second cavity.
Shape & size
Shape and size of D376
One tap opening beyond the main rear rim
A central ceramic neck carries the tap position
The small rectangular support projects behind the bowl’s rear edge in the top plan. It does not span the full body width.
The short inner faces turn upward
A swept bowl with an open thin front edge
The smooth washing cavity rises toward its short ends. Its long front edge remains visually distinct from those higher inner faces.
One rear tap hole and one floor opening
The support and bowl carry different openings
The top plan places the tap opening on the rear projection and a separate opening in the bowl floor. No additional overflow is shown.
580 × 405 × 150 mm overall
Specify the support and bowl as one above-counter model
D376 is white ceramic with above-counter installation. The published height describes the complete exterior rather than usable inner depth; fittings in the photograph do not establish supply.
D376
580 × 405 × 150 mm
D376 swept bowl with a central projecting rear tap support
- D376 — 580 × 405 × 150 mm
- Required quantity