SN101WD Series Reversible Double Bowl Fireclay Workstation Sink

The SN101WD series has two apron-front options built into the same sink body. One side has a smooth farmhouse apron, and the other side has a single recessed horizontal groove. During installation, the installer can choose which side faces outward, so this double bowl fireclay workstation sink with single recessed groove apron can also be installed with a clean smooth-front look. The single-groove side is the featured apron style for this product page.

SN101WD is available in 33-inch and 36-inch versions. The 33-inch SN101W3320D measures about 838 mm wide, 510 mm front to back, and 254 mm high, and is typically matched with a 36-inch minimum farmhouse sink base. The 36-inch SN101W3620D measures about 914 mm wide, 508 mm front to back, and 254 mm high, and is typically matched with a 39-inch minimum farmhouse sink base. Because fireclay sinks can have dimensional tolerance, the cabinet opening and apron cutout should be checked against the actual sink before installation.

SN101WD uses a 50/50 double bowl layout, with two equal-width bowls separated by a center divider. This setup helps users separate washing, rinsing, soaking, and prep tasks. Buyers who regularly handle oversized cookware should also compare this model with a single bowl farmhouse workstation sink before final selection.

Use the smooth side when the kitchen design needs a plain farmhouse front with minimal detail. Use the single-groove side when the design needs a subtle horizontal shadow line across the apron. The single recessed groove gives the front more definition than a smooth apron while staying simpler than a double-groove, fluted, or heavily decorative apron design.

Yes. SN101WD has integrated workstation ledges along the front and rear inner edges of the sink. Compatible accessories, such as a cutting board, colander, or roll-up rack, can rest over the bowl area for prep, rinsing, and draining. Bottom grids should be listed separately because they sit at the bottom of the bowls to help protect the fireclay surface; they are not ledge-mounted accessories.

No. SN101WD is an apron-front fireclay sink body and does not include pre-drilled faucet holes on the sink deck. The faucet is typically installed through the countertop behind the sink, or wall-mounted depending on the kitchen design. Buyers should confirm faucet placement, backsplash clearance, drain alignment, countertop cutout, and cabinet support before installation.

SN101WD and SN102WD are closely related reversible double bowl fireclay workstation sink series with the same main structure, 50/50 bowl layout, workstation function, material, finish, and farmhouse installation type. The key difference is the groove pattern on the patterned apron side. SN101WD has one smooth side and one single recessed groove apron side, while SN102WD has one smooth side and one double recessed groove apron side. Choose SN101WD for either a smooth apron or one subtle horizontal groove. Choose SN102WD when the project needs a stronger apron-front detail with two recessed horizontal grooves.