Rectangular Basin with Curved Front Corners
D578 pairs a straight rear edge with broad arcs at the two front corners. The rectangular basin with curved front corners retains a straight middle section across its front, rather than a fully curved front perimeter. A full-width ceramic tap deck runs along the rear with one tap opening. The washing cavity remains continuous in front of that deck, with one floor opening represented in the plan and no overflow shown. Smooth upright outer walls carry the narrow front edge. The catalogue lists both above-counter and wall-hung installation for this white ceramic body, measuring 430 × 305 × 130 mm overall. Those mounting choices belong to the same factory model; its 130 mm height is an exterior measurement.
Shape & size
Shape and size of D578
Curved corners around a straight front middle
The front corner transitions differ from the straight rear
The original plan joins a straight front section to the side walls through broad arcs. The rear perimeter remains straight around the tap deck.
One opening in the integrated rear area
The ceramic deck spans the back of the bowl
The tap opening stays in the full-width rear deck. The single washing cavity extends in front of it, without a separately represented overflow.
Above counter / wall hung in the catalogue
Both published mounting options belong to D578
The manufacturer prints the two installation methods together for K578. The entry does not establish which mounting fittings are included in a particular supply configuration.
430 × 305 × 130 mm overall
Specify D578 with the required mounting method
The complete white ceramic body includes its rear deck and curved front corners. The printed height describes its exterior rather than a separately measured internal bowl depth.
D578
430 × 305 × 130 mm
D578 rear-deck basin with two published mounting options
- D578 — 430 × 305 × 130 mm
- Above counter or wall hung
- Required quantity