Fine Fluted Square Basin With Rear Tap Deck
The fine fluted square basin with rear tap deck separates a closely ribbed exterior from a plain inner bowl. D592 has equal 415 mm outside axes, with softened corners around its square footprint. Fine vertical flutes rise along the outer wall and stop beneath a smooth upper band. At the rear, a ceramic deck contains one tap hole. Three small overflow openings appear in a row on the inner wall below that section, while one floor opening lies in the bowl. The white ceramic body is listed for above-counter mounting and measures 415 × 415 × 120 mm overall. Its ribbed wall and grouped rear openings define this configuration.
Shape & size
Shape and size of D592
Close vertical ribs on the exterior
Fine fluting below a smooth upper band
The source elevation represents narrow vertical ribs around the outside wall. The flutes stop below a plain upper band; the inside remains unpatterned.
Three small apertures beneath the deck
A row of overflow openings below one tap position
The original photograph shows three separate overflow holes in the inner rear wall. The ceramic deck above them carries one drilled tap position.
Two equal 415 mm outside axes
A square footprint with softened corner transitions
Small corner arcs soften the square outside outline. The rear deck occupies one side of the perimeter and backs a smooth bowl with one floor opening.
415 × 415 × 120 mm overall
Specify the D592 body and its above-counter installation
The printed dimensions describe the complete white ceramic body. Above-counter mounting is listed, and the 120 mm outside height does not state internal depth.
D592
415 × 415 × 120 mm
D592 fine flutes and grouped rear openings for the project
- D592 — 415 × 415 × 120 mm
- Required quantity