Wall-Mounted Brushed Nickel Soap Dish Holder
Finish range
7 finishes available on 862010
The same tooling is produced in every finish below. Finish is selected at order stage, so one model can cover several project standards. Mixed-finish orders are accepted within one purchase order.
Name the finish on every line of the purchase order rather than once at the top. Ask for the finish sample card.
Brushed Nickel
Every piece below is the same design in the same finish — specified and quoted as one set.
Send a spec. Get a real quote in 12h.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Wet Zone Detail
A brushed nickel bathroom wall soap dish for bar soap
862010 is specified where bar soap is still used, at the basin or inside the shower. Its whole job is keeping the bar off a wet surface between uses.
Soap off the counter
A wall dish stops soap sitting in a puddle on stone or ceramic. That is a cleaning decision as much as a design one.
Basin side or shower side
The same model works in both positions. Placement changes the height and the splash exposure, so mark it on the drawing.
Decide bar soap or dispenser before this line is priced, because the choice changes the count per room. The set is in the 862 hardware series.
Fit & Clearance
Placing 862010 in and out of the splash zone
The listing confirms wall mounting only.
Take the dish size, projection and fixing centres from the dimensional sheet for 862010.
Inside a shower, set the height so the dish is reachable from standing but out of the direct spray line.
Confirm whether the fixing lands on tile, on a stone slab or on a panel system.
Construction & Finish
The dish is inspected at handover, so name its colour early
SUS304 stainless steel is recorded. No coating or treatment is stated, and the finish is a name chosen at order stage.
Seven finish names, one dish
Brushed Nickel, Chrome, Polished Chrome, Polished Gold, Brushed Gold, Gun Grey and Antique Bronze are on the record for 862010.
Basin dishes and shower dishes can be ordered under different names on the same order where the two zones follow different schemes.
Approve the finish on a physical sample keyed to 862010, then write that same full name against every line of the purchase order. The seven names are not interchangeable.
Compliance
Import documents to name with the 862010 order
The spec sheet for 862010 sets out the product description. Anything an inspector or a submittal needs is a separate line.
Customs paperwork and submittal paperwork are two different requests. Say which one you need and for which market.
No certification is recorded on this listing and none should be inferred from the material. We will confirm what can travel with the shipment.
Procurement
Ordering 862010 with the basin wall group
The dish is a low value line that still holds up a shipment if it is left off the PO.
Buyers take 862010 with 862011 tumbler holder on the basin wall, then add 862001 towel bar, 862009 towel ring, 862008 robe hook, 862003 towel rack, 862007 toilet paper holder and 862006 toilet brush holder for the full room. One PO and one inspection keeps the finish matched and the container consolidated. Private label, custom finish and printed cartons sit under the SANIKB OEM and ODM program.
Include these details with the RFQ
- Bar soap or dispenser in the amenity plan
- Dishes per bathroom, basin and shower
- Quantity per finish name
- Other 862 models on the same order
- Fixing kit for the substrate
- Destination port and Incoterm
Quotes are returned within 12 hours. A mixed finish order is accepted on one PO.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request