Alcove Whirlpool Bathtub with Hourglass Basin, 63 in
SANIKB G-908 is a skirted alcove whirlpool bathtub in white acrylic, rectangular outside with a wavy, hourglass-shaped inner basin. It comes in one size, G-908, at 1600 × 800 × 600 mm (63 × 31.5 × 23.6 in). A single black headrest sits between two chrome posts at one end, black grab handles curve over the front and back rims, and the opposite end deck carries a spout and hand shower. Two round chrome buttons sit on the deck corner by the headrest. G-908 is cUPC certified, and enquiries are answered in writing within 12 business hours.
Compare sizes in the alcove bathtub collection.
More in Alcove Bathtubs
MOQ per model · one 40HQ container, quantity set by tub size
-
6111Rectangular Alcove Whirlpool Bathtub with Headrest, 59 in59" × 31.5" × 26.8"Three-wall alcove
-
FT072Alcove Whirlpool Tub with Apron Front, Single-Ended, 71 in71" × 31.5" × 23.2"Three-wall alcove
-
D-1022Rectangular Alcove Bathtub with Apron Front and End Drain, 60 in60" × 29.9" × 18.5"Three-wall alcove
-
BTS603260x32 Acrylic Skirted Apron Bathtub60" × 31 1/2" × 21 1/16"Alcove
-
BTS603060x30 Acrylic Alcove Bathtub60" × 30" × 22"Alcove
-
BTA603260x32 Acrylic Alcove Bathtub60" × 31 7/8" × 22"Three-wall alcove
Tub sheet
Size and installation of G-908
Send a spec. Get a real quote in 12 business hours.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Basin & Whirlpool
Hourglass inner basin in a rectangular skirted shell
Outside, G-908 is a plain rectangle with a front skirt. Inside, the basin walls curve in toward the middle, which gives the hourglass outline seen from above.
Underwater whirlpool jets
Whirlpool jets are set near the headrest, in the middle of the basin and toward the front. The jet count and layout are confirmed at quotation.
Two grab handles, two deck buttons
Black curved grab handles are fitted on the front and back rims. Two round chrome buttons sit on the deck corner at the headrest end, and the faucet set is at the far end.
Other jetted sizes are in the SANIKB whirlpool tub collection.
Fit & Alcove
1600 mm alcove tub, 800 mm wide
G-908 is 1600 mm (63 in) long, 800 mm (31.5 in) wide and 600 mm (23.6 in) high, skirted on the front for a three-wall alcove.
- Overall Size
- 63" × 31.5" × 23.6" (1600 × 800 × 600 mm)
- Installation
- Alcove, front skirt
- Faucet Position
- Deck, end opposite the headrest
G-908 is made as one version rather than as L and R SKUs. Check which end carries the faucet and the drain on the approved drawing, then match it to the plumbing wall of the alcove.
Leave service access to the whirlpool pump in the alcove layout, positioned from the approved drawing.
Construction & Finish
White acrylic shell, black trim
G-908 is made from pure acrylic sheet in white.
White
White shell with black handles
The shell is white; the headrest and the two grab handles are black.
The curving walls leave the basin wider at each end than at its middle, so check bather clearance against the approved drawing rather than the overall width alone.
Ask at quotation whether the headrest, grab handles and faucet set are fitted before packing or boxed loose, since that changes how the carton is built.
Agree in the supply contract how long the buyer has to report damage found on delivery.
Compliance
cUPC certification for G-908
Request paperwork against G-908 by name so the document set matches the tub delivered.
G-908 carries cUPC certification. Before a submittal, request the certificate number and how long it remains valid.
Tell us the destination market and the documents required for the jets and controls, and the written reply on G-908 is sent within 12 business hours.
Procurement
Ordering G-908
G-908 is offered in one SKU, G-908. Quantity and the fitting scope are set in the quotation.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- Sent within 12 business hours
Standard lead time is 30-45 days after sample approval, so book the sample round into the project schedule. Private label buyers can use the SANIKB OEM and ODM program.
Include these details with the RFQ
- Quantity of G-908
- Destination market, port and power supply for the pump
- Faucet set, headrest and handles: included or not
- Carton marking
- Shipping window
Hold the G-908 lead time as indicative until the quotation is issued.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request