SNT3020H 30 Inch Reversible Single-Bowl Fireclay Farmhouse Sink

The SNT3020H is a 30 inch reversible single bowl fireclay farmhouse sink: both apron faces are fully glazed and finished, so the sink can be installed with either face on display to suit your cabinet run and layout. Either way, you get the same single 30″ × 20″ × 10″ fireclay bowl with a centered drain. The reversible design lets you spec one SKU into different kitchen configurations.

Plan for a 36-inch sink base cabinet. The sink body measures 756 mm (29.75″) wide, and the apron front needs a front cut-out plus side clearance; a 33-inch base is the absolute minimum and usually has to be modified. Overall bowl height is 10″ (251 mm), with a usable interior depth of about 8.7″ (222 mm) and a centered drain.

There are no pre-drilled faucet holes. On a farmhouse sink the faucet mounts on the countertop or wall behind the sink, so you keep full control over faucet placement and hole count. The bowl has a centered Ø3.5″ (89 mm) drain opening that fits a standard 3.5″ basket strainer; the matched stainless drain assembly has a 4.5″ top flange.

No — the bottom grid and drain are optional accessories rather than standard inclusions, so you decide whether to add them. The matched stainless steel bottom grid (27.3″ × 17.1″) sits on the base of the bowl to keep pots and pans off the fireclay glaze, and the stainless drain has a 4.5″ top flange to fit the centered Ø3.5″ opening. Add either or both to your order, and confirm the quantity per sink on your PO so each unit ships as you intend.

Fireclay is natural clay fired at around 2,200°F until it fuses into a dense, non-porous ceramic with a glossy glaze. That hard surface resists stains, heat and household chemicals, shrugs off the scratches and dents that show on stainless steel, and won't chip down to bare metal or rust the way enameled cast iron can. Each sink is handcrafted, so slight variation in finish and texture is normal and dimensions can vary by up to ¼″. The SNT3020H is finished in glossy white.

Yes. SANIKB manufactures the SNT3020H as an OEM/ODM supplier, so custom sizes, colors and private-label branding are all available. The standard minimum order is 50 pieces with a 30–45 day lead time, and the sink is cUPC certified for U.S. and Canadian plumbing codes. Send your spec or target dimensions for a quote within 24 hours.