Round Tube Cold Water Gooseneck Kitchen Faucet DL-02 402
DL-02 402 is a cold-water gooseneck kitchen faucet with a round body and a single side lever. The spout is a round tube bent into a high C shape, and the faucet has a threaded tail. DL-02 402 is made of brass, and no height options are given.
Offered in Chrome and Matte Black within SANIKB's wholesale kitchen faucets range, this round tube cold water kitchen faucet lets one project list a round-arc profile in either finish.
More in Gooseneck Kitchen Faucet
Mix any models in one 20ft container · no per-model minimum
-
DL-02 411Square Base C-Tube Chrome Cold Water Gooseneck Kitchen Faucet DL-02 411Deck-mounted, single hole
-
DL-02 405Curved Lever Chrome Cold Water Gooseneck Kitchen Faucet DL-02 405Deck-mounted, single hole
-
DL-02 404Square Flat Spout Chrome Cold Water Gooseneck Kitchen Faucet DL-02 404Deck-mounted, single hole
-
DL-05 104Inverted-U Flat Spout Chrome Gooseneck Kitchen Faucet DL-05 104Deck-mounted, single hole
-
DL-05 105Flared Base Slim Tube Chrome Gooseneck Kitchen Faucet DL-05 105Deck-mounted, single hole
-
DL-05 008Tall Narrow C-Spout Chrome Gooseneck Kitchen Faucet DL-05 008Deck-mounted, single hole
-
DL-05 034Bell Body Scroll Lever Antique Brass Gooseneck Kitchen Faucet DL-05 034Deck-mounted, single hole
-
DL-05 086Square Block Ribbon Spout Chrome Gooseneck Kitchen Faucet DL-05 086Deck-mounted, single hole
-
DL-05 001Angled Lever Matte Black Gooseneck Kitchen Faucet DL-05 001Deck-mounted, single hole
-
DL-05 007Flat-Tip Arched Spout Gooseneck Kitchen Faucet DL-05 007Deck-mounted, single hole
-
DL-05 087Cone Stem Chrome Gooseneck Kitchen Faucet DL-05 087Deck-mounted, single hole
-
K1032 03Swan Stem Brushed Rose Gold Gooseneck Kitchen Faucet K1032 03Deck-mounted, single hole
-
K127 03Matte Black & Brushed Gold Noir Gilt Gooseneck Kitchen Faucet K127 03Deck-mounted, single hole
-
FYF-05045Brushed Nickel 3-Way Water Filter Kitchen Faucet, Dual Handle12.8" H × 9.8" reachDeck-mounted single hole
-
FYF-05151Chrome L-Shaped Right-Angle Spout Single-Lever Kitchen Faucet12.2" H × 11.6" WDeck-mounted single hole
-
FYF-05022Chrome Single-Lever Gooseneck Kitchen Faucet, High-ArcDeck-mounted, single hole
-
FYF-0514913.6-Inch Gooseneck Kitchen Faucet with 8-Inch Spout Reach – FYF-0514913.6" H × 9.4" WDeck-mounted single hole
-
FYF-0505817.3 Inch Gooseneck Kitchen Faucet with Blade Lever – FYF-0505817.3" H × 9.1" spout reachDeck-mounted single hole
-
FYF-0505515-Inch Gooseneck Kitchen Faucet with 8.3-Inch Spout Reach – FYF-0505515.0" × 9.6"Deck-mounted single hole
-
FYF-05019Two Handle Gooseneck Kitchen Faucet with 8-Inch Centers – FYF-0501913.0" H × 9.3" W, 7.5" spout reachDeck-mounted, 3-hole 8" centers
-
FYF-05054Compact Brushed Nickel Gooseneck Kitchen Faucet – FYF-0505413.4" H × 6.9" spout reachDeck-mounted single hole
-
FYF-0501314.8-Inch Gooseneck Kitchen Faucet, Single-Handle – FYF-0501314.8" H × 8.7" spout reachDeck-mounted single hole
Model sheet
2 factory configurations of DL-02 402
Every option below is a produced configuration with its own SKU. 2 finishes. Name the exact SKU on each purchase order line.
-
NO. DL-02 402-BK
Matte Black -
NO. DL-02 402-CP
Chrome
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Send a spec. Get a real quote in 12 business hours.
Engineer-reviewed. CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Design & Form
A Round Tube Spout in a Tall C-Shaped Arc
DL-02 402 pairs a round body with a plain round-tube spout that curves into a tall C shape.
Round Body, Threaded Tail
The body is round and carries a single side lever. DL-02 402 has a threaded tail.
C-Shaped Round Tube Spout
The spout keeps a round cross-section and bends into a tall C-shaped arc. The profile is a round tube rather than a flat or squared section.
DL-02 402 is offered in Chrome and Matte Black.
Fit & Clearance
Mounting and Tail for DL-02 402
DL-02 402 has a threaded tail, so tail length and mounting hole size belong on the pre-order checklist.
- Type
- Gooseneck Kitchen Faucet
- Finish
- Chrome, Matte Black
- Material
- Brass
Confirm the mounting hole size and counter thickness range against the model spec sheet before drilling for DL-02 402.
State the target finish, Chrome or Matte Black, on each purchase order line.
Request written confirmation from the factory on tail length before installing on an uncommon deck thickness.
Construction & Finish
Brass Build Offered in Two Finishes
DL-02 402 is built in brass and offered in Chrome and Matte Black, its two stated finishes.
Finish · 2
Two Tones, One Silhouette
DL-02 402 is offered in Chrome and Matte Black. No third finish is stated for this model.
-
Matte Black
-
Chrome
Request samples of both Chrome and Matte Black for approval before confirming an order that carries both finishes of DL-02 402.
Approve each finish sample separately in writing before production is scheduled.
Documents
Documents for DL-02 402
Country, port and the document set your customs broker asks for. That is enough to start the conversation.
Tell us the destination market for DL-02 402 and the route your importer follows. We confirm in writing which documents can travel with the goods before production is scheduled.
Send the requirements your inspector or customs broker uses. The document set is agreed per order, so nothing is assumed from another model.
Procurement
Placing an Order for DL-02 402
DL-02 402 is offered in Chrome and Matte Black, and both finishes can go on one quote.
- Published MOQ
- 100 pcs
- Quote response
- Within 12 business hours
One purchase order can carry both the Chrome and Matte Black units of DL-02 402.
Buyers building a private-label line around DL-02 402 can review the SANIKB OEM and ODM programme before ordering.
Include these details with the RFQ
- Target quantity per finish
- Finish split: Chrome and/or Matte Black
- Destination country and port
- Packaging and labeling preference
- Requested lead time
Send these five points in one message that names DL-02 402.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request