









Reversible Fluted and Smooth Fireclay Workstation Sink

More in 30 Inch Fireclay Sink
Mix any models in one 20ft container · no per-model minimum
-
SN2419S/SN2719S/SN3018S/SN3219/SN3319SSingle Bowl Series Rectangular Single Bowl Fireclay Drop In SinkUndermount / top-mount
-
SN3320S/SN3320WDSmooth Apron Single-Bowl Fireclay Farmhouse SinkApron front / farmhouse
-
SNT3020H/SNT3320HD/SNT3620SNT3020H 30 Inch Reversible Single-Bowl Fireclay Farmhouse SinkApron front / farmhouse
-
SN3021/SN3321Curved Apron Single-Bowl Fireclay Farmhouse SinkApron front / farmhouse
-
SN104WSN104W Reeded Fireclay Apron Workstation SinkApron front / farmhouse
-
SN2418/SN3018/SN3318/SN3618Classic Fireclay Farmhouse Apron Front SinkApron front / farmhouse
-
SN105WSN105W Fireclay Apron Workstation Sink with Recessed Panel FrontApron front / farmhouse
Dimension sheet
2 factory configurations of SN103W
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
-
NO. SN103W302030 inch -
NO. SN103W332033 inch
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 30 inchSN103W3020 | 33 inchSN103W3320 | |
|---|---|---|
| Overall L×W×D | 30″ × 20″ × 10″ 756 × 510 × 251 mm | 33″ × 20″ × 10″ 838 × 510 × 251 mm |
| Spec sheet |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 12 business hours.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Reversible Apron
Two apron faces sold as one stocked item
The SN103W is fluted on one face and smooth on the other. The installer decides which one the room sees, so one code covers two looks.
Fluted or plain, chosen on site
For a distributor this reduces the number of decisions at the point of sale. The customer picks a face rather than a model, and the warehouse still holds one item.
SN103W3020 and SN103W3320
SN103W3020 and SN103W3320 are the two entries under this model. Both are single bowl and both are listed as a workstation build.
One shelf position, two faces. It sits with the other apron bodies in the fireclay apron sink range.
Fit & Clearance
Deciding which face goes out before the cabinet is cut
A reversible body only stays reversible until it is installed. The cabinet opening has to be right for either orientation.
- Widths
- 30" and 33" codes
- Bowl Layout
- Single
- Type
- Workstation
- Mounting
- Apron front / farmhouse
Neither width on this listing carries a measured envelope. Get the drawing for the code you are quoting and hand that to the cabinet maker instead of the nominal inch figure.
The spec carries a workstation entry. Get the accessory list before the product page is written, because a ledge that ships bare is a different listing from one that ships loaded.
Confirm on the drawing that the two faces share the same overall depth.
Construction & Finish
A single glossy white on both faces
A buyer writing this up still has only one finish to describe. The record carries fireclay ceramic and a glossy white, and that holds for the fluted face and the smooth face alike.

Glossy white
One finish, two profiles
Because the colour does not change with the face, a showroom display can be flipped without reordering. Approve the white against your own sample before a repeat order.
Both faces belong to the same body on this listing. No separate finish reference is published for either side.
Ask for photographs of both faces under the same lighting for your catalogue.
Compliance
cUPC listing for SN103W
The spec sheet and the drawing are issued against the reference ordered. Ask for them when a project needs evidence.
SN103W is cUPC listed. The published specification also holds material, type, mount, finish, size and MOQ. Before it goes into a submittal, request the current listing number and certificate validity so the documentation matches your destination market.
Workstation sinks are specified alongside the cabinet run, so give the destination market and the unit count at RFQ and the document set is scoped with the quotation.
Procurement
Stocking one code that shows two faces
One code carries the whole 50 piece minimum here, instead of splitting it over two fixed face models.
- Published MOQ
- 50 pcs
- Standard Lead Time
- 30-45 days (typical)
If you want the reversible story printed on your own carton, that artwork is handled through the SANIKB OEM and ODM program. Send your label template with the enquiry.
Include these details with the RFQ
- Quantity split between 30 and 33 inch
- Drawing showing both apron faces
- Accessories included with the ledge
- Carton size and packing method
- Label and manual language
- Documents needed in your market
- Destination port and Incoterm
Production slots move through the year. Ask for the current window when you enquire.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request






