SN3320T 33 Inch Fluted Single-Bowl Fireclay Farmhouse Sink
Send a spec. Get a real quote in 12h.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
12 consecutive years at KBIS and IBS.
Standard on every shipment.
Design & Apron
A fluted apron on a 33-inch single-bowl fireclay body
SN3320T is a single-bowl fireclay farmhouse sink with a fluted apron face. The apron is reversible, so the face that shows is settled at installation.
Fluted apron, reversible
The apron carries a fluted profile and is built to be reversed. One SKU then serves two front treatments.
Undivided single bowl
The basin is not split, so sheet pans and roasting trays sit flat. Interior bowl depth is not published, so take it from the drawing.
It sits with our other single-bowl farmhouse sinks, so a buyer can range apron treatments without changing bowl format.
Fit & Clearance
Cabinet planning around 32 3/4 by 19 3/4 inches
Published dimensions are 32 3/4 in. x 19 3/4 in. x 9 7/8 in. (832 x 502 x 251 mm). Plan the cabinet from those figures, not the nominal label.
An apron-front sink is carried by the cabinet, not the countertop. The base needs a cut-down front rail and a support deck at the height your fabricator calls out.
The 33-inch nominal width is a common replacement size. Confirm the real opening on site before you commit stock.
Send the current drawing to the fabricator before the counter is templated.
Construction & Finish
Glazed fireclay in a single published finish
The published construction is fireclay ceramic with a glossy white glaze.
Glazed fireclay ceramic body
Fireclay is clay fired with a fused glaze surface. Glossy white is the only finish published for this model.
Fireclay is heavy and each piece moves slightly in the kiln. Treat published dimensions as nominal and ask for the tolerance band in writing.
Request a current production sample if the white must match other ceramic.
Compliance
No mark is listed, so state the market you ship to
Requirements differ by country and by project. Name the market and the approving body in your enquiry.
No certification mark appears in the published data for SN3320T, so none is claimed on this page.
Name the destination market when you request a quote. We will confirm which documents can be supplied for this model.
Procurement
Quoting SN3320T: minimum, timing and paperwork
Published MOQ for this model is 50 pieces.
We supply importers, distributors and showrooms on wholesale terms. Private label and cartons run through the SANIKB OEM and ODM program.
Lead time follows run size and kiln scheduling. Your quotation carries the date we commit to.
Include these details with the RFQ
- Quantity per shipment and annual forecast
- Destination market and discharge port
- Carton, pallet and barcode requirement
- Private label artwork, if any
- Sample quantity before the run
- Spec sheet and installation drawing
- Incoterms and payment terms
MOQ and lead time here are indicative. The quotation is binding.
Model SN3320T is cast from fireclay ceramic and high-fired into a vitrified, non-porous body measuring 32 3/4" x 19 3/4" x 9 7/8" (832 x 502 x 251 mm). The fluted, ribbed apron is molded into the clay and finished in a glossy white fire-glazed surface that resists staining, heat, and abrasion. The dense ceramic keeps the parallel flutes sharply defined and chip-resistant through heavy daily use.
This 33-inch fluted apron-front sink mounts as a farmhouse basin with the ribbed apron exposed at the cabinet face and the bowl set undermount or flush to the counter. The deep single bowl handles oversized pots and trays for residential and hospitality kitchens. At 32 3/4" x 19 3/4" x 9 7/8", it suits standard 36-inch farmhouse base cabinets, and we provide support specs for the heavy fireclay body.
SN3320T is available for OEM and private-label production, with custom flute spacing, glaze colors, dimensions, and buyer branding at flexible MOQs. The fluted apron is a high-demand decorative profile for distributors and project specifiers building premium farmhouse lines. Contact us for wholesale pricing, lead times, and samples.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request