亚克力靠墙独立式浴缸，台阶式底座，3孔水龙头平台，59及67英寸
Wholesale · 20 ft / 40 ft · Mix available · Below 1 container: your own China forwarder required.
SANIKB D-8353 是一款亮白色亚克力靠墙独立式浴缸，立在台阶式底座上而非支脚上。平直的缸背靠墙，前角为大圆角，前沿有一圈卷边。缸盆边缘距后沿 90 mm，后方留出带三个水龙头孔的台面，用于台面安装水龙头套装；水龙头套装是否随缸发货，在报价时商定。两种长度共用 800 mm 宽度：D-8353-150，1500 × 800 × 600 mm（59 × 31.5 × 23.6英寸）；D-8353-170，1700 × 800 × 600 mm（67 × 31.5 × 23.6英寸）。D-8353 通过 cUPC 认证，两种长度的书面报价均在12个工作小时内返回。
可在 SANIKB 独立式浴缸系列中，与其他靠墙式和独立式造型对比。
可为 Amazon、Wayfair 等电商平台卖家供货；两种长度也便于精装房和住宅开发项目按户型批量配置。
More in 独立式浴缸
MOQ per model · one 40HQ container, quantity set by tub size
Tub sheet
Size and installation of D-8353
Every option below is a produced configuration with its own SKU. 2 sizes. Name the exact SKU on each purchase order line.
Order codes
| SKU | Size |
|---|---|
| D-8353-150 | 59" x 31" |
| D-8353-170 | 67" x 31" |
Mixed-configuration orders are accepted within one purchase order. Confirm the SKU, finish and size on the quotation before sample approval. Request the full configuration list.
Compare · 2 sizes
Size & spec comparison
| 59" x 31"D-8353-150 | 67" x 31"D-8353-170 | |
|---|---|---|
| Overall L×W×D | 59″ × 31.5″ × 23.6″ 1500 × 800 × 600 mm | 67″ × 31.5″ × 23.6″ 1700 × 800 × 600 mm |
Common specs above apply to every size; the table compares only what changes by size. Custom sizes available for OEM/ODM.
Send a spec. Get a real quote in 1 business day.
Engineer-reviewed. cUPC · CE · ISO 9001 ready. 30–45 day lead time, FOB or CIF.
We send quotes within 1 business day after receiving the necessary product, quantity and destination details.
12 editions of the International Builders' Show (IBS).
Factory documentation
Certification scope depends on the selected model and destination market. Request model-specific documents with your quotation.
Shape & Base
Flat back, rounded front, stepped plinth
D-8353 stands with its long straight side against a wall. The two front corners are large-radius rounds, the lip is rolled around the front, and the shell rests on a stepped plinth base rather than on feet.
Three tap holes behind the bowl
The bowl rim is set 90 mm in from the back edge, and D-8353 is shown with a 3-hole deck tap set on that strip. Tap-hole drilling is confirmed on the approved drawing, and whether the tap set ships with the tub is agreed at quotation.
Double-ended bowl, center drain
Both ends of the bowl are shaped as backrests and the drain is at the center. Inner depth is 455 mm at each end and 470 mm at the center.
Buyers comparing back-to-wall tubs usually weigh base style and tap position first. Other shapes are in the freestanding bathtub range.
Fit & Footprint
1500 or 1700 mm long on an 800 mm width
Both lengths share a width of 800 mm (31.5 in) and an overall height of 600 mm (23.6 in). Only the overall length and the inner bowl length change between the two SKUs.
- D-8353-150
- 59" × 31.5" × 23.6" (1500 × 800 × 600 mm)
- D-8353-170
- 67" × 31.5" × 23.6" (1700 × 800 × 600 mm)
- Installation
- Back to wall, straight back edge against one wall
- Material
- Acrylic, white gloss
Along the length, the bowl opening starts 50 mm in from each end and slopes down to a basin floor 960 mm long on the 1500 mm size and 1160 mm on the 1700 mm size. Across the width, the bowl opening is 660 mm and the basin floor 520 mm.
Set the drain rough-in from the approved drawing, and check the wall line is straight along the full tub length before the plinth is placed.
Construction & Finish
Pure acrylic shell on a stepped plinth
D-8353 is made from pure acrylic sheet with a white gloss surface, a rolled front lip and a stepped plinth in place of feet.
White
Same finish on both lengths
D-8353 is made in white gloss only, so 1500 mm and 1700 mm units on the same project match.
Because the tub stands on its plinth rather than on separate feet, the floor must be level where the plinth sits.
Acrylic scuffs when units rub together in transit. Agree edge and face protection inside the carton, and how damage found on arrival is reported, before the first shipment.
Record any carton damage at delivery and report it within the agreed window.
Compliance
cUPC certification for D-8353
Request paperwork against D-8353 by name. If other SANIKB models ship on the same order, list each one so its documents are issued separately.
D-8353 is cUPC certified. Before the tub is written into a submittal, request the current certificate number and its validity for your destination market.
Name the market and the documents your project needs in the inquiry; a written reply on D-8353 is issued within 12 business hours.
Procurement
Ordering D-8353 by length
Each length has its own SKU: D-8353-150 for 1500 mm and D-8353-170 for 1700 mm.
- Standard Lead Time
- 30-45 days after sample approval
- Quote Reply
- Within 12 business hours
Order quantities are set per SKU at quotation. Other SANIKB tubs that can go on the same inquiry are in the bathtub manufacturer range, and own-brand cartons are covered under OEM and ODM service.
Include these details with the RFQ
- Quantity for D-8353-150 and D-8353-170
- Destination market and port
- Tap-hole drilling for the back deck
- Whether a deck tap set is part of the order
- Brand marking on carton
- Requested shipping window
The quotation fixes the D-8353 lead time; the figure above is a guide.
How we work
From enquiry to shipment
A factory-direct process built for importers, distributors and project buyers. No trading layer in between.
-
01
Send the enquiry
Tell us the model, quantity, destination market and any branding or packaging requirement. A spec sheet or drawing helps but is not required to start.
-
02
Our sales team contacts you
A named account manager follows up by email or WhatsApp, confirms the specification and clarifies anything missing before pricing.
-
03
Quotation
You receive a written quotation with unit price, MOQ, packing details, lead time and the trade term you asked for. Entry, mid and premium build levels can be quoted side by side.
-
04
Sample approval
We send a sample for finish, function and packaging sign-off. Branded samples are produced once artwork is confirmed.
-
05
Production and shipment
Mass production starts after sample approval and deposit. QC and inspection run before loading, then the order ships to the agreed port.
OEM and ODM to your specification
We develop to a brief. Send a reference model, a drawing or simply the price band and market you are targeting, and we will propose what fits. Entry, mid and premium builds are all available from the same factory.
- Your logo on product, carton and documentation
- Private-label packaging and manuals
- Custom finish matched to your standard
- Custom dimensions and tooling where volume supports it
- Product development from your reference or price target
- Destination-market documentation prepared on request