Tapered Oval Solid Surface Bathtub
Chargement 40HQ estimé
The XA-8806 is a tapered oval solid surface bathtub in the SANIKB range. A slim oval rim opens into a rounded basin with a smoothly tapered exterior. Match this specific design and the selected catalogue size to the project layout before approving the order.
Published specifications
| Original factory model | XA-8806 |
|---|---|
| Product type | Solid Surface Bathtub |
| Material | Solid Surface |
| Photographed shape | Oval |
| Certification | cUPC certified |
Model and dimensional schedule
| Factory model | Source-listed dimensions |
|---|---|
| XA-8806 | 1500 × 760 × 540 mm |
| XA-8806 | 1600 × 800 × 540 mm |
| XA-8806 | 1700 × 860 × 540 mm |
| XA-8806 | 1800 × 900 × 570 mm |
Dimensions are in millimeters and retain the catalogue’s listed sequence. Request written confirmation from the factory for measurement axes, drain position and the installation interface. The photograph describes the design; the ordered supports and connections are confirmed with the approved supply package.
Design and sample review
A slim oval rim opens into a rounded basin with a smoothly tapered exterior. Review the rim, inner bowl and outside profile together with the room layout. Keep the approved sample and selected dimensions with the factory model reference so the quotation identifies the exact design.
Certification and project documents
This solid surface bathtub range is cUPC certified. Request written confirmation from the factory for the certification documents and installation instructions your project requires. Coordinate local project requirements with the model spec sheet and quotation.
Request a quotation
Send model XA-8806, the selected dimensions, quantity, destination country and target project date. The quotation confirms the final finish, supply package, packing, minimum order quantity and lead time. Compare other designs in the solid surface bathtub collection or browse all bathtub ranges.
Autres modèles dans Solid Surface Bathtubs
Compare designs and catalog sizes. Order quantities and lead time are confirmed in your quotation.
-
T8709Round Plinth Solid Surface Bathtub1500 × 1500 × 550 mm
-
T8707Slim Plinth Rounded Rectangle Solid Surface Bathtub1700 × 750 × 550 mm
-
T8706Flat Rear Rounded Rectangle Solid Surface Bathtub1700 × 750 × 550 mm
-
T8508Tapered Side Oval Solid Surface Bathtub1400 × 700 × 550 mm / 1500 × 720 × 550 mm / 1600 × 720 × 550 mm / 1700 × 720 × 550 mm
-
T8572Straight Edge Rectangle Solid Surface Bathtub1300 × 680 × 550 mm / 1400 × 700 × 550 mm / 1500 × 700 × 550 mm / 1600 × 700 × 550 mm / 1700 × 720 × 550 mm
-
T8507Low Rim Oval Solid Surface Bathtub1300 × 680 × 550 mm / 1400 × 700 × 550 mm / 1500 × 720 × 550 mm / 1600 × 750 × 550 mm / 1700 × 750 × 550 mm
-
T8705Tapered Rounded Rectangle Solid Surface Bathtub1700 × 800 × 580 mm
-
T8703Oval Plinth Solid Surface Bathtub1750 × 800 × 550 mm
-
T8702Contoured Oval Solid Surface Bathtub1700 × 800 × 550 mm
-
T8506Flat Back Rectangle Solid Surface Bathtub1500 × 720 × 550 mm / 1600 × 750 × 550 mm / 1700 × 750 × 550 mm
-
T8503L/RCorner Profile Rectangle Solid Surface Bathtub1500 × 720 × 550 mm / 1600 × 750 × 550 mm / 1700 × 750 × 550 mm
-
T8501Clean Oval Solid Surface Bathtub1500 × 720 × 550 mm / 1600 × 750 × 550 mm / 1700 × 750 × 550 mm
-
T8701Plinth Rounded Rectangle Solid Surface Bathtub1700 × 780 × 550 mm
-
T8607Continuous Oval Solid Surface Bathtub1300 × 680 × 550 mm / 1400 × 780 × 550 mm / 1500 × 780 × 550 mm / 1600 × 780 × 550 mm / 1700 × 780 × 550 mm
-
T8672Wide Deck Rectangle Solid Surface Bathtub1300 × 700 × 550 mm / 1400 × 700 × 550 mm / 1500 × 700 × 550 mm / 1600 × 700 × 550 mm / 1700 × 720 × 550 mm
-
T8208Deep Bowl Oval Solid Surface Bathtub1700 × 800 × 630 mm
-
T8203Soft Shell Oval Solid Surface Bathtub1500 × 760 × 550 mm / 1600 × 800 × 550 mm / 1700 × 800 × 550 mm
-
T8202Slim Bowl Oval Solid Surface Bathtub1600 × 750 × 550 mm
-
T8201Thin Rim Oval Solid Surface Bathtub1500 × 760 × 550 mm / 1600 × 800 × 550 mm / 1700 × 800 × 550 mm
-
T8997-2Straight Support Boat Solid Surface Bathtub1800 × 850 × 680 mm
-
T8997-1Swept Frame Boat Solid Surface Bathtub1800 × 850 × 680 mm
-
XA-8898Stepped Base Oval Solid Surface Bathtub1800 × 800 × 580 mm
-
XA-8879Round Bowl Solid Surface Bathtub1300 × 1300 × 550 mm
-
T8997Elongated Support Boat Solid Surface Bathtub1800 × 850 × 508 mm
-
XA-8877Narrow Rim Oval Solid Surface Bathtub1700 × 700 × 600 mm
-
T8996-2Open Frame Boat Solid Surface Bathtub1800 × 800 × 680 mm
-
T8996-1Frame Supported Boat Solid Surface Bathtub1800 × 800 × 680 mm
-
XA-8872Straight Wall Rectangle Solid Surface Bathtub1500 × 720 × 550 mm / 1600 × 720 × 550 mm / 1700 × 720 × 550 mm / 1800 × 760 × 580 mm
-
XA-8866Low Bowl Oval Solid Surface Bathtub1300 × 650 × 550 mm / 1400 × 700 × 550 mm / 1500 × 760 × 550 mm / 1600 × 750 × 550 mm / 1700 × 800 × 550 mm
-
XA-8863Broad Opening Oval Solid Surface Bathtub1600 × 750 × 520 mm / 1700 × 800 × 520 mm / 1800 × 850 × 550 mm
-
T8996Suspended Boat Solid Surface Bathtub1800 × 800 × 512 mm
-
T8992Pedestal Boat Solid Surface Bathtub1800 × 850 × 600 mm
-
T8991Raised End Boat Solid Surface Bathtub1800 × 800 × 600 mm
-
XA-8862Slim Edge Rounded Rectangle Solid Surface Bathtub1800 × 750 × 520 mm
-
XA-8861Tapered Bowl Oval Solid Surface Bathtub1650 × 700 × 520 mm
-
XA-8858Smooth Rounded Rectangle Solid Surface Bathtub1600 × 700 × 550 mm
-
XA-8851Long Rounded Rectangle Solid Surface Bathtub1700 × 700 × 520 mm
-
XA-8839Wide Rim Oval Solid Surface Bathtub1800 × 1100 × 600 mm
-
XA-8837Elongated Rounded Rectangle Solid Surface Bathtub1700 × 750 × 550 mm
-
XA-8817Slim Rim Oval Solid Surface Bathtub1600 × 700 × 565 mm
-
XA-8819Wide Swept Oval Solid Surface Bathtub1800 × 1100 × 620 mm
-
XA-8816High Back Slipper Solid Surface Bathtub1850 × 800 × 930 mm
-
XA-8833Rounded Bowl Oval Solid Surface Bathtub1500 × 850 × 570 mm / 1780 × 980 × 570 mm
-
XA-8829Horizontal Band Rectangle Solid Surface Bathtub1500 × 750 × 550 mm
-
XA-8827Angular Rectangle Solid Surface Bathtub1700 × 800 × 560 mm
-
XA-8808Rounded Rectangle Solid Surface Bathtub1700 × 720 × 560 mm
-
XA-8809Curved Accent Oval Solid Surface Bathtub1500 × 750 × 550 mm
-
XA-8825Fluted Rectangle Solid Surface Bathtub1700 × 750 × 550 mm
-
XA-8807Smooth Oval Solid Surface Bathtub1500 × 750 × 580 mm / 1650 × 780 × 580 mm
-
XA-8823Soft Taper Oval Solid Surface Bathtub1700 × 750 × 550 mm
Models & sizes
4 catalog size options for Tapered Oval Solid Surface Bathtub
The entries below pair catalog sizes with factory model codes. A model code may be shared across sizes or designs. 4 Dimensions. Include the design name, factory model and selected dimensions on each quotation and purchase order line.
Références de commande
| SKU | Dimensions |
|---|---|
| XA-8806 | 1500 × 760 × 540 mm |
| XA-8806 | 1600 × 800 × 540 mm |
| XA-8806 | 1700 × 860 × 540 mm |
| XA-8806 | 1800 × 900 × 570 mm |
Confirm the design name, factory model, selected dimensions and ordered configuration in the quotation before approval. Request model and size confirmation.
Send a spec. Get a real quote in 12 business hours.
Send the factory model, design, selected dimensions, quantity and destination. Confirm installation, packing and documentation in your quotation.
Les détails techniques complets sont disponibles sur la page en anglais.
Project quotation
From selected model to agreed supply
A quotation and approval process for bathtub distributors and project buyers.
-
01
Send the model and size
Send the factory model, design, selected dimensions, quantity and destination. State the installation conditions and project schedule.
-
02
Review the supply package
Confirm the selected design, finish, drain connections and required documentation within the proposed supply package.
-
03
Written quotation
The written quotation confirms price, order quantity, packing, lead time and trade terms for the selected bathtub.
-
04
Approve the specification
Approve the bathtub dimensions, finish, installation details and packing against the model documents before the order is released.
-
05
Confirm the shipment schedule
The accepted quotation and order confirm the production schedule, inspection requirements and destination for the selected bathtub package.
Confirm the required supply package
The written quotation confirms model, dimensions, quantity, packing and requested documentation. Requested changes are reviewed for the selected design.
- Factory model and design
- Catalog dimensions
- Packing and destination
- Documentation required