Rear Outlet Toilets

A rear outlet toilet sends waste horizontally through the wall behind the bowl, through a P-trap, instead of down into the floor. This collection holds 150 rear outlet toilets in ceramic, spanning wall hung, one-piece, two-piece, back-to-wall and smart toilet bodies. The printed P-trap height is 180 mm on 133 models, with others listing 135, 150, 170, 175 or 185 mm. Many floor-standing models also list an S-trap rough-in, most often 10 in, with 12, 16, 8, 6 and 4 in settings on selected models. Washdown is listed on 54 models, swirl on 39, rimless on 27, dual jet on 15 and siphonic on 13. Body lengths run from 470 to 750 mm, and white is listed on 146 models. The range suits renovation and new-build projects where the drain runs through the wall.

Service
OEM / ODM · moule gratuit à partir de 300 pièces
MOQ
1 conteneur ×20ft · assortiment libre
Délai de production
30–45 jours après l’échantillon
150 produits

Envoyez un cahier des charges. Recevez un réel Devis sous 12 heures ouvrables.

B2B uniquement. Pas de réponses automatiques ni de catalogues génériques. Un ingénieur SANIKB étudie votre brief et vous répond sous 12 heures ouvrées en vous fournissant la faisabilité, le MOQ, les délais de livraison et un devis détaillé.

Un devis détaillé — pas cinq
Faisabilité & certification vérifiées selon le marché
Vous avez un cahier des charges ? Joignez-le à votre demande ci-dessous.
— Présentation du projet B2B uniquement
Veuillez saisir votre prénom.
Veuillez saisir le nom de votre entreprise.
Veuillez saisir une adresse e-mail valide.
Veuillez saisir votre numéro de téléphone.
Glisser & déposer ou parcourir les fichiers PDF / IMG / XLS · 4MB ×3
    Réponse d’un ingénieur sous 12 heures ouvrées

    Documentation du fabricant

    La portée des certifications dépend du modèle choisi et du marché de destination. Demandez les documents propres au modèle avec votre devis.

    Certificat cUPC IAPMO
    Certificat de management de la qualité ISO 9001
    Certificat d’approbation du produit WRAS
    Certificat d’inscription IAPMO
    Certificat d’inspection technique CE UDEM

    Questions fréquentes

    Which rear outlet toilet types are in this collection?

    The collection holds 150 rear outlet toilets. By body type, 64 are one-piece, 60 wall hung, 16 two-piece, 6 back-to-wall and 6 smart toilets, with a few models tagged under more than one type. Body lengths run from 470 to 750 mm. Use the type filter first, then compare outlet heights and footprints on each product page.

    What P-trap heights do these rear outlet toilets use?

    The printed P-trap height is 180 mm on 133 of the 150 models. Other models list 135, 150, 170, 175 or 185 mm, and the 135 mm height appears on wall-hung smart toilets. Match the printed height to the drain position in the wall, and confirm it against the drawing on each product page before the wall is finished.

    Can rear outlet toilets also connect to a floor drain?

    Many floor-standing models list both a P-trap rear outlet and an S-trap floor outlet. The most common S-trap rough-in is 10 in (77 models), followed by 12 in (29), 16 in (12) and 8 in (11), with single models at 6 and 4 in. Check the product page for the settings each model lists, or browse the 10 inch rough-in collection.

    What is the MOQ and lead time for rear outlet toilets?

    MOQ, samples and lead time are quoted per model, because they depend on the model mix, finish, carton marking and destination. Send the rear outlet toilet models, quantities and destination port in one inquiry, and the quotation states each figure line by line. Written replies are issued within 12 business hours, so a project schedule can be checked before the order is placed.

    Can rear outlet toilets be supplied under our own brand?

    Private-label supply runs through the SANIKB OEM and ODM program: brand marking on the product, carton and inserts, with documents prepared model by model. Certification marks are listed per model (some models print CE or cUPC), so name the target market and the marks it requires, and the quotation lists which models fit. Mixed containers can carry several body types under one brand.

    How should a distributor choose a rear outlet toilet?

    Start with the wall: wall hung toilets need a wall-hung installation, while one-piece, two-piece and back-to-wall bodies stand on the floor. Next, match the printed P-trap height to the drain. Then choose a flushing style, washdown, swirl, rimless, dual jet or siphonic, and compare body length against the room layout.