bathroom plumbing resource

What Is a Shower Diverter? 2-Way vs 3-Way and Matching Outlets

A shower diverter routes mixed water to one outlet at a time; about 95 of 177 SANIKB shower systems list two outlets.

Brushed gold shower diverter controls and a matching handheld shower with a connected hose mounted on warm limestone.
En esta página

    Quick answer: A shower diverter is the control that sends the mixed water from one shower valve to one outlet at a time, such as the shower head, the handheld or the tub spout. Of 177 active SANIKB shower systems and sets, about 95 list two outlets, 41 list three outlets, 4 list four or more and 16 list a single outlet. Of 29 active SANIKB shower valve trim kits, 13 carry "diverter" in the product name and 10 designs come as a same-series pair with and without a diverter.

    What is a shower diverter? A shower diverter is the control that sends the mixed water from one shower valve to one outlet at a time, such as the shower head, the handheld or the tub spout. The shower valve sets water temperature and flow. The diverter valve decides where that water comes out in the bathroom.

    For a buyer, the diverter is a counting problem. Count the outlets in the bathroom plan first. Then pick a valve body and trim that select between exactly that many points. This guide gives you the outlet counts behind SANIKB's live shower range, the trim SKUs that change when you add a diverter, and a checklist to run before a purchase order.

    F612006 brushed gold concealed shower system with round rain head, handheld on a hose and one round trim plate with a lever and diverter knob, installed in a bathroom

    How does a shower diverter work?

    Hot and cold supply lines meet in the mixing valve. The valve blends them and sends one stream of mixed water into the plumbing system. A diverter valve sits on that mixed stream and opens one path while it closes the others. When you turn or pull the diverter handle, it redirects water to different outlets in turn.

    The control can be a knob on the wall trim plate, a pull-up knob on a bath mixer, a push button or a separate handle. The mechanism is the same: one inlet, several exits, and a selector that decides which exit is open.

    A diverter does not add water pressure. It sends the full water flow to one head. A valve that runs two heads together splits that flow between them.

    Diverter vs mixing valve

    A mixing valve controls hot and cold water and sets the water temperature. A shower diverter valve controls water flow direction. Most shower systems carry both, either inside one valve body or as two parts behind one trim plate. When a listing says "single control with no diverter," the shower has a mixing valve and only one outlet path.

    Diverter vs transfer valve

    A shower transfer valve is a selector that, in many designs, can also feed two heads at once. A simple two-position diverter sends water to one destination or the other. Some diverters add a shared position, and transfer valves or separate on/off controls can run heads together, so get that function in writing. Some vendors use "transfer valve" and "diverter" as the same word, and others use "volume control" for a valve that sets flow at each outlet.

    The practical rule is simple. If the user must run the rain head and the handheld together, confirm that position on the quote. Do not assume a diverter valve has it.

    Count the outlets before you choose a shower diverter valve

    For your project, the answer to what is a shower diverter starts with a number. The outlet count decides how many diverter positions you need. A single showerhead needs no diverter at all. Two need a two-position selector. Three or more need a selector with more positions, or separate controls for each one.

    SANIKB's live lineup shows where most projects land. We counted the "Outlets" spec in 177 active shower systems and faucet sets across concealed, exposed, thermostatic and tub/shower types. Of 177 active SANIKB shower systems and sets, about 95 list two outlets, 41 list three outlets, 4 list four or more and 16 list a single outlet. Counts come from listing text, so treat them as approximate.

    Outlets in the shower plan Active systems and sets (about) Diverter positions needed Example SANIKB models
    1 outlet 16 of 177 None, single control S133A 21 (rain head only)
    2 outlets 95 of 177 Two DL-08 525, DL-08 250, DL-08 210
    3 outlets 41 of 177 Three, or separate controls DL-08 606, DL-08 182, DL-08 502
    4 or more outlet points 4 of 177 Multi-position selector or volume knobs DL-08 523, SP1015A 23, DL-08 095, DL-08 177
    Unclear or no Outlets value 21 of 177 Confirm on the spec sheet F-series sets such as F612006 and F383108 have no Outlets field

    The split also differs by product type. Among 80 concealed shower faucets, 48 list two. Among 64 exposed shower systems, 32 list three, because exposed columns often add a lower spout or spray gun. Among 14 tub/shower faucets, 12 list two: the tub spout and a shower head.

    Write the outlet list as nouns, not as a number. "Rain head, handheld, tub spout" is clearer than "3-function." It also makes the quote match the layout you drew.

    2-way shower diverter vs 3-way: why the labels disagree

    There is no single meaning for "2-way" or "3-way" on a shower diverter. Vendors use the terms differently. Some call a two-outlet selector "2-way" and a three-outlet selector "3-way." Others use "3-way" for a two-outlet selector that adds a "both on" position. A few count the inlet as one of the ways.

    So one supplier's "3-way" valve may serve two heads while another's serves three. Order by label alone and the rough-in body may arrive with the wrong outlet count.

    SANIKB listings describe the function in words. SP1016 22 is listed as "valve trim with a two-way diverter plus rough-in." SP088 22 is listed as "valve only, with a two-outlet diverter." SP1018 22 is a trim whose knob "switches water between 2 outlets." Each of these 2-way shower diverter trims serves two named destinations.

    The rule for your submittal: read the outlet list, not the label. Write each head or spout the diverter valve must serve, and ask the supplier to confirm the same list on the quote. That answers what is a shower diverter in your project's terms.

    Two-valve and three-valve diverters are about handles, not outlets

    Older tub/shower setups add more confusion. A two valve diverter often means separate handles for hot and cold, with the diverter built into the tub spout. A three valve diverter usually means three separate handles: hot, cold and a diverter handle in the middle. Here "valve" counts handles on the wall, not outlets.

    When a renovation brief says "replace the three valve diverter," confirm whether the new design keeps separate handles or moves to a single lever with a diverter knob.

    Common types of shower diverter valve, by where the control sits

    For ordering, sort shower diverter valve types by where the control sits. That location decides which trim and which valve body you buy. SANIKB's range shows three common types.

    Wall-plate knob on concealed systems

    On concealed systems, the valve is installed in the wall and only the trim plate shows. The diverter appears as a small knob on that plate, next to the temperature lever. The round plate lever and diverter concealed system DL-08 525 uses this layout. One round wall plate carries a single lever and a diverter knob, feeding a rain head and a handheld on a slide bracket.

    The brushed gold round rain shower system with handheld F612006 uses the same idea. Its round trim plate carries a lever and a small diverter knob that selects between the round rain head and the handheld. Its listing title mentions dual handles while the photo shows one lever plus a knob, so confirm the control layout on the spec sheet before ordering.

    Push buttons and knobs on exposed shelf mixers

    Exposed shower systems mount the mixer on the bathroom wall surface, often as a shelf or bar. The selector moves onto the mixer body. The three-button shelf exposed shower system with lower spout DL-08 182 carries three push buttons and a round knob on a white-top shelf valve. It serves a rain head, a handheld and a lower spout.

    DL-08 182 chrome exposed shower column with three-button shelf valve, rain head, handheld and lower spout

    The round-head button shelf exposed shower system with spray gun DL-08 095 has a front rotary knob and four push buttons. It serves a rain head, a handheld, a spray gun and an under-shelf outlet. On button layouts, confirm on the spec sheet which button runs which head before you print user signage.

    Top-mounted knob on tub and shower bodies

    SANIKB's exposed tub/shower bodies put the diverter on top of the mixer. The flare spout tub and shower faucet set DL-08 210 has a single flat blade lever and a pull-up diverter knob on top. One exposed brass body feeds a flat flared tub spout and a diverter outlet for a handheld shower.

    DL-08 210 chrome exposed tub and shower faucet set with flat flared tub spout, flat blade lever and pull-up diverter knob on top

    The Crisp Cube tub and shower faucet set DL-08 250 uses the same idea in a square body. A short square tub spout sits at the left, a diverter knob sits on top and a flat blade lever sits at the right. It is listed in 4 finishes: brushed gold, chrome, gun metal grey and matte black.

    Same design, two SKUs: what the diverter changes on the order

    On trim kits, the diverter is not an add-on. It is a different SKU. Of 29 active SANIKB shower valve trim kits, 13 carry "diverter" in the product name and 10 designs come as a same-series pair with and without a diverter. In each of those 10 pairs, the "21" model is the single control and the "22" model adds the diverter.

    Series Without diverter With diverter Listing wording (verbatim)
    Square Arch SP1016 21 SP1016 22 "a single control with no diverter" vs "valve trim with a two-way diverter plus rough-in"
    Flat Blade SP1018 21 SP1018 22 "valve only with a single lever" vs "valve only with a lever and diverter"
    Valve Wheel SP088 21 SP088 22 "valve only, for a single outlet, with no diverter knob" vs "valve only, with a two-outlet diverter"
    Slim Pillar SP1020 21 SP1020 22 "valve only with a single lever" (21)
    Blush Lever SP076C 21 SP076C 22 74 1 Diverter version named in the product title
    Curved Cone SP092 21 SP092 22 Diverter version named in the product title
    Flat Ribbon SP1003C 21 SP1003C 22 43 1 Diverter version named in the product title
    Onyx Tip SP1025 21 SP1025 22 Diverter version named in the product title
    Oval Pin SP1010B 21 SP1010B 22 43 2 Diverter version named in the product title
    Slant Cut SP1014 21 SP1014 22 59 2 Diverter version named in the product title

    The name is not a complete filter. At least 3 more trims serve multiple outlets without "diverter" in the title. SP1004F 22 lists "valve only (ring handle + diverter)." SP703B 22 lists "valve only, two outlets" with two knobs. SC030 23 has three push buttons described as outlet controls. Read the outlet line on every trim, not just the title.

    Within the 10 pairs, the suffix gives you a quick check. If a paired trim line on your PO ends in "21" but the plan shows a shower head and a handheld, the order is wrong. Swap it for the "22" model of the same series before the quote is confirmed.

    Look at the faces, too. The Square Arch brushed gold shower valve trim kit SP1016 21 has a single pin lever on a round hub. The Square Arch brushed gold diverter shower valve trim kit SP1016 22 adds a small round diverter knob above the hub. The plate looks almost the same, so check the knob in the product photo before you sign off a sample.

    The same holds in the Valve Wheel series. The Valve Wheel gun metal grey diverter shower valve trim kit SP088 22 sets a small diverter knob above the wheel-style handle. Gun metal grey is its only listed finish, so name that finish on the order.

    The diverter changes the rough-in valve body, not just the trim

    A diverter trim needs a diverter valve body behind it. The two parts are a matched set. SANIKB's SP1016 pair shows this clearly, because each listing pictures its own rough-in body.

    Rough-in valve body for the SP1016 21 Square Arch single-control shower valve trim kit with no diverter Rough-in valve body for the SP1016 22 Square Arch diverter shower valve trim kit

    Compare the two bodies side by side. The SP1016 22 body carries a second stem above the mixing cartridge for the diverter, which the SP1016 21 body does not have. Confirm port count and outlet routing on the spec sheet. You cannot turn one body into the other by changing the trim plate later.

    That is why the diverter decision belongs at rough-in, before the wall is closed. A trim upgrade after tile is a trim swap. A diverter upgrade after tile means opening the wall. Both SP1016 listings include the rough-in with the trim, which keeps the body and the plate matched in one SKU.

    Ask for the model spec sheet with the quote, and confirm the body against the plumbing plan. For background on how trims, cartridges and bodies fit together, see our guide to cartridge, trim kit and rough-in basics.

    Two-outlet layouts: shower head plus handheld

    Two outlets are the most common layout in SANIKB's range, at about 95 of 177 systems and sets. The usual pair is an overhead showerhead and a handheld. In a bathtub, the pair is the showerhead and the tub spout.

    For a two-outlet shower, you need one diverter valve with two positions. Check three things on the spec sheet. First, which head the diverter feeds in each position. Second, whether the heads and hoses ship in the set. Third, whether the rough-in body is included.

    F612006 is a concealed set with a shower head Ø 10" (250 mm) and a hand shower 7 7/8" (200 mm), offered in brushed gold, brushed nickel and matte black.

    DL-08 525 serves the same pair with a round plate, a curved wall arm and a round handheld on a slide bracket. A round wall outlet completes the layout. It is listed in chrome and matte black.

    A two-point layout also suits most thermostatic faucets. Among 19 thermostatic shower faucets, 14 list two. For temperature control choices, see our guide to concealed vs exposed thermostatic shower faucets.

    Three-outlet layouts: adding a tub spout or lower spout

    A third outlet usually adds a tub spout, a lower spout, an under-shelf outlet or a spray gun to the rain head and handheld. About 41 of 177 SANIKB systems and sets list three outlets. Most of them, 32 of 41, are exposed systems.

    F383108 chrome concealed shower system with square rain head, slide-bar handheld and tub spout installed over a bathtub

    The chrome square rain shower system with slide bar handheld and tub spout F383108 is a concealed three-outlet example. A diverter at the concealed valve routes flow to the overhead rain head, the slide-bar handheld or the tub filler spout. The set lists a 9.84" × 9.84" (250 × 250 mm) rain head and a 15.75" (400 mm) shower arm.

    DL-08 606 does the same with a matte black square plate. One plate carries a single lever and a diverter. The set has a square rain head, a square handheld, a wall outlet and a wall-mounted tub spout.

    DL-08 502 is the exposed version of this idea. A rectangular bar valve with end controls has a tub spout under it. A square riser carries the rain head, and a square handheld rests on a slide holder.

    The check for any three-outlet system: confirm that the selector has three positions or that each outlet has its own control. Then confirm which positions the bathtub spout and the showerhead share. A layout drawing with each outlet labeled prevents site guesswork.

    Four or more outlets: body jets and volume knobs

    Only 4 of 177 SANIKB systems list four or more outlet points. These are spa-style bathroom layouts with body jets, spray guns or waterfall spouts. At this count, one selector is rarely the whole answer. Designs use several controls that each run a head or set its volume.

    DL-08 523 matte black concealed shower system with flush ceiling rain panel, six square body jets, handheld and a tall five-knob control plate

    The ceiling rain matte black body jet concealed shower system DL-08 523 pairs a flush square ceiling rain panel with six square body jets and a square handheld. A tall vertical plate holds five knobs. Ask the spec sheet to map each control to its head before installation.

    The Slate Wedge gun metal grey body jet concealed shower system SP1015A 23 lists a rain head, three body jets and a handheld. A rectangular valve plate with an angular lever sits with three small square volume knobs. Volume knobs are a different function from a simple diverter, because they set how much water flow reaches each head.

    On the exposed side, DL-08 177 serves a rain head, handheld, spray gun and waterfall outlet from a torpedo-shaped bar mixer with rotary end caps.

    For these layouts, ask one question in writing: which heads can run together, and which run alone? The answer changes how users experience the shower and how the plumbing contractor sizes the supply and checks water pressure. In US projects, also check local showerhead flow limits for any position that runs two heads together, and ask for flow data per position on the spec sheet.

    Tub and shower sets: the tub spout diverter question

    A tub/shower combination needs a way to send water to either the tub spout or the showerhead. There are two common places for that control. A tub spout diverter is a pull-up gate on the spout itself. A valve diverter is a knob on the mixer or the trim plate.

    F348408 brushed nickel concealed tub and shower faucet set with square shower head and tub spout with pull-up knob, single-lever concealed valve, installed

    The two exposed SANIKB tub/shower sets in this guide put the diverter on the mixer, not in the spout. DL-08 210 uses a pull-up diverter knob on top of the body. DL-08 250 uses a diverter knob on top of a square bar mixer. Both send water to the tub spout or the handheld.

    F348408 is a concealed tub and shower faucet set in brushed nickel. Its listing gives a shower head 8" × 8" (200 × 200 mm), a trim plate 5.5" × 5.5" (140 × 140 mm) and a tub spout 5.25" projection (133 mm). The shower head and tub spout are served from one concealed single-lever valve. Its photo shows a pull-up knob on the tub spout, while the listing describes an integrated diverter, so confirm on the spec sheet whether the diverter ships in the spout or the valve.

    Before you order, confirm where the diverter control sits on the model you pick. A spout-mounted diverter and a valve-mounted diverter need different parts. Mixing the two on one project creates confusing user instructions and two spare-part lists.

    What the spec sheet must confirm

    The spec sheet is the document that closes the decision.

    Ask for these items on each model:

    • The outlet list, by name, in diverter order.
    • Whether the diverter selects one outlet at a time, or whether any position runs two together.
    • Whether the rough-in body is included with the trim.
    • Whether shower heads, handhelds, hoses and arms are included. SANIKB trim kits do not list heads, and wording varies: some say 'valve trim + rough-in', others 'valve only'.
    • The finish name, written exactly as listed.

    Do not assume a SANIKB trim or body fits a valve from another brand. Ask for the spec sheet and match parts within the same model.

    Bathroom design: how to choose a diverter setup by project type

    The project type usually fixes the outlet list. Start here, then adjust to the drawings.

    Hotel guest bathrooms and multifamily units

    Repeat bathroom units reward a simple, consistent layout. A single handle plus one diverter knob keeps user instructions short. Use one series across the project, and order the "21" or "22" trim by unit type. Write the outlet list into each unit-type schedule.

    Tub/shower rooms and spa-style showers

    A tub/shower room needs a tub spout in the outlet list. Choose a tub and shower set with the diverter on the mixer, like DL-08 250, or a concealed three-outlet system like F383108. For spa-style showers with body jets, use a multi-knob system and get the knob-to-outlet map in writing.

    Common mistakes when ordering a diverter shower

    Catch these on paper, before the PO goes out.

    • Ordering by "2-way" or "3-way" alone. The labels mean different things to different vendors. Order by the outlet list.
    • Mixing "21" and "22" trims in one unit type. The single-control trim cannot serve a second outlet. Check the trim suffix against the outlet count.
    • Changing the trim but not the body. A diverter trim needs a diverter valve body. Keep them matched as one SKU.
    • Assuming heads are included. Trim kits do not list heads, and some are listed as valve only. Confirm what ships per SKU.
    • Expecting two heads to run at once. A simple two-position diverter runs one at a time, and only some designs add a shared position. If both must run, ask for that function on the quote.
    • Skipping the knob map on multi-outlet systems. Five knobs with no map means guesswork for installers.

    Pre-PO checklist for diverter shower systems

    Run this checklist on every shower line before you issue a purchase order. It turns the question of what is a shower diverter into a set of yes/no checks.

    1. Outlets: List every outlet by name: shower head, handheld, tub spout, lower spout, body jets.
    2. Positions: Match diverter positions to the outlet count. One outlet means no diverter.
    3. Trim suffix: On the 10 paired series, "21" is single control and "22" is the diverter; otherwise read the listing's outlet line.
    4. Rough-in: Confirm the rough-in body is included and matches the trim. Some trims are listed as valve only.
    5. Heads and hoses: Confirm what ships in the set and what you order separately.
    6. Control location: Wall-plate knob, top knob, push button or separate handle.
    7. Finish: Write the finish name exactly as listed.
    8. Quantity: The listed MOQ on SANIKB shower systems and trim kits is 100 pcs. MOQ, samples and lead time are confirmed in the written quotation per model.

    Ready to price a project? Send us the model, size and quantity for each shower line, plus the outlet list for each unit type. SANIKB replies within 12 business hours, and MOQ, samples and lead time are confirmed in the written quotation per model. Start your shortlist with our shower valve and trim kits.

    Frequently asked questions

    What is the difference between a diverter valve and a mixing valve?

    A mixing valve blends hot and cold water and sets temperature, while a diverter valve chooses which outlet receives that mixed water. Most shower systems combine both behind one trim plate. A SANIKB trim listed as a single control with no diverter has the mixing function only and serves one outlet. If your plan shows two or more outlets, specify a model whose listing names the diverter.

    What is a two-way shower diverter?

    A two-way shower diverter is usually a selector that switches water between two outlets, such as a rain head and a handheld. Vendors use the term differently, so read the outlet list rather than the label. SANIKB SP1016 22 is listed as valve trim with a two-way diverter plus rough-in. Name both outlets on your inquiry so the quote matches the layout.

    Where is the shower diverter located?

    Shower diverter location depends on the system type. On concealed systems, a small knob sits on the wall trim plate next to the lever, as on DL-08 525. Exposed shelf mixers use push buttons or knobs on the shelf. Exposed tub and shower bodies like DL-08 210 put a pull-up knob on top. Confirm the control location on the spec sheet before ordering.

    What is shower diverter trim?

    Shower diverter trim is the visible plate, lever and diverter knob that pair with a diverter valve body inside the wall. About 16 of SANIKB's 29 active trim kits serve more than one outlet, and 10 designs come in matched pairs. Within the 10 paired series, the 21 model is single control and the 22 model adds the diverter; other trims use other suffixes, so read the outlet line. Order the trim and its matching rough-in body together.

    — Rokan, SANIKB